Hitachi RAC-10JH4 страница 30 Скачать руководство пользователя

Страница: 30 / 36

– 30 –

MAINTENANCE

■

To ensure clean usage, please dry the interior of the Two Way Air Exchange Fan and Hose.

• If this is the first time during the year (seasons) that the device is being used to cooling or dehumidifying operation,

please conduct one of the following maintenance procedures.

• If this is the first time during the year (seasons) that the device is being used to heat, please conduct one of the

following maintenance procedures.

• If odors from the fresh air window are a concern, even if maintenance has been conducted on the duct filters,

please conduct one of the following maintenance procedures.

Maintenance During the Summer

• After sealing the room, please conduct the following for 4 hrs..

Please perform dehumidify operation.

Please set the temperature to 24°C.

Please set the fan speed to “SILENT”.

Please perform the exhaust (HI) operation.

Maintenance During the Autumn or Rainy Season

• After opening the room, please conduct the following for 4 hrs..

Please perform heat operation.

Please set the temperature to 32°C.

Please set the fan speed to “SILENT”.

Please perform the exhaust (HI) operation.

• If the outside temperature is above 24°C, please conduct maintenance by

following the “Maintenance During the Summer” procedures. (When the
outside temperature exceeds 24°C, the machine does not operate the
heater to prevent any damage.)

Maintenance During the Winter

• After opening the room, please conduct the following for 4 hrs..

Please perform heat operation.

Please set the temperature to 32°C.

Please set the fan speed to “SILENT”.

Please perform the exhaust (HI) operation.

(Two Way Air Exchange Fan and Hose)

Содержание RAC-10JH4





































Результаты поиска

Содержание RAC-10JH4

Отзывы:

Похожие инструкции для RAC-10JH4

Бренды по названию

Популярные бренды

Hitachi RAC-10JH4, Инструкция по эксплуатации

Результаты поиска

Содержание RAC-10JH4

Отзывы:

Похожие инструкции для RAC-10JH4

Бренды по названию

Популярные бренды