Hitachi RA-08MDF, Руководство по эксплуатации и установке

Страница: 4 / 12

– 2 –
COOLING OPERATION
Use the device for cooling when the outdoor temperature is 21 ~ 43°C.
If indoor humidity is very high (over 80%), some dew may form on the air outlet grille and de
fl ectors of the unit.
Press the (COOLING) button so that the display indicates pointing to button.
Cooling operation starts with a beep.
The cooling function does not start if the temperature setting is higher than the current room
temperature. The cooling function will start as soon as you set the temperature below the
current room temperature.
Set the desired FAN SPEED with the (FAN SPEED) button (the display indicates the setting).
(AUTO) : The FAN SPEED is HI at fi rst and change to MED or LOW automatically when
the preset temperature has been reached.
(HI) : High fan speed.
(MED) : Medium fan speed.
(LOW) : Low fan speed.
Set the desired room temperature with the TEMPERATURE button (the display indicates the
setting).
The range of 25 ~ 28°C is recommended as the room temperature for cooling.
The temperature setting and the actual room temperature may vary depending on conditions.
Press the (STOP) button to stop operation.
■
As the settings are stored in memory in the remote controller, you only have to press the
(COOLING) button next time.
1
2
STOP
3
■ Dehumidifying Function
When the room temperature is higher than the temperature setting: The device will start to dehumidify and lower the
room temperature to the preset level.
When the room temperature is lower than the temperature setting: Dehumidifying will be performed at the temperature
setting slightly lower than the current room temperature, regardless of the temperature setting. The function will stop
(the fan will stop emitting air) as soon as the room temperature becomes lower than the setting temperature. You
might feel a bit colder in dehumidifying operation.
DEHUMIDIFYING OPERATION
Use the device for dehumidifying when the room temperature is over 16°C.
When it is under 15°C, the dehumidifying function will not work.
■
As the settings are stored in memory in the remote controller, you only have
to press the
(DEHUMIDIFYING) button next time.
Set the desired room temperature with the TEMPERATURE button (the
display indicates the setting).
The range of 20-26 ˚ C is recommended as the room
temperature for dehumidifying.
2
Press the (DEHUMIDIFY) button so that the display indicates
pointing to button.
Dehumidifying operation starts with a beep.
The FAN SPEED is set at LOW automatically.
The FAN SPEED button does not work.
1
Press the (STOP) button to stop operation.
STOP