Hitachi RA-08JDF2, Руководство по эксплуатации и установке

Страница: 5 / 36

– 5 –
HOW TO USE
AUTOMATIC OPERATION
■
The device will automatically determine the operation mode either COOL or
DEHUMIDIFY depending on the initial room temperature.
Press the (START/STOP) button
●
Operation start with a “beep”.
Press the (START/STOP) button
●
Please make sure you have selected the (Automatic) mode
by using the (FUNCTION) button.
●
The starting operation will occur an abnormal sound (turbo
sound) which doesn’t affect the operation.
●
The fan speed selector does not work at this operation.
1
STOP
■
You can slightly adjust the room temperature.
Press the (ROOM TEMPERATURE) button
●
Temperature setting change by 1°C for each 1 time press.
2
Up
2
Down
●
You can raise or lower the temperature setting by a maximum of
3°C.
● The display does not indicate the preset temperature in the
Automatic mode. Device will receive the setting by a “beep”.
1
■
CONDITION OF AUTOMATIC OPERATION
●
The selected mode of operation will not change during the operation even though the room
temperature change.
Initial room temperature
Function Temperature setting FAN SPEED
(approx.)
HIGH at start, LOW after
Over 27°C COOL 27°C the preset temperature is
reached
16 ~ 27°C DEHUMIDIFY
Slightly lower than the
QUIET
room temperature