Hitachi RA-08HDF, Руководство по эксплуатации и установке

Страница: 17 / 36

– 17 –
SLIDE OUT OF UNIT
1
Remove the four screws which
fasten the base pan to the cabinet
at the side and back.
2
Slide out the unit by pulling the
handles.
After slide in the unit, please install the sealer between the base pan and cabinet to prevent
from entering rain water in case of typhoon. Fasten the unit to cabinet at the side with the
screw, then refit the front cover.
Sealer
Handle
95mm
POWER CORD ARRANGEMENT
If power cord is withdrawn from left side
of unit, please arrange the power cord as
in figure after installing the front cover.
Power
cord
Front cover
(Inside view)
Guider
Base pan
Minimum
30mm
When the screws at the both side of the cabinet cannot be fasten, please use the stopper (a
“L” shape metal plate that is provided in the plastic bag with the sealer) to fix the cabinet and
the base pan located at in front of the unit.
The steps to fix the stopper are as below:
1
Remove the screw which fasten the plastic band
and electrical box to the base pan.
2
Fix and align the stopper into the rectangular
hole of the cabinet.
3
Fasten back the screw to fix plastic band, stopper
and electrical box to the base pan.
STOPPER
TEMPERATURE
TEST
COOLER
1
2
3
4
5
6
7
Cabinet
Electrical box
Stopper Base pan
Plastic band
Control panel
RA-08HDF/JDF_EN(OI) 15/03/2004, 03:18 pm 17