Hitachi R-WB640VRU0, Инструкция по эксплуатации

Страница: 12 / 17

12
Care and Maintenance
NOTICE
Water tank
Cleaning once a week
WARNING
WARNING Do not touch the mechanical
(Touching these parts might result in injury.)
parts of the automatic ice maker.
Ice maker
●
If the Automatic Ice Maker is not set to "Stop," the water pump may make sounds occasionally. This is not a malfunction.
Grasp the Tank. To remove
the lid, use your finger to
insert pull the lid up.
●
Slide the lid in back-end first in the direction of the arrows to close the lid.
In order to prevent grime and hard water stains
from
building up, make sure to rinse the Water Tank
1. How to open the Lid.
2. How to Close the Lid.
Tank
Do not use cleansers as this may damage the filter.
In order to prevent grime and hard water stains from building up,
●
Replace the Water Filter when it wears out. Water Filters need replacing every 3 to 4 years.
2. Pull the tab to remove the Water
Filter from the case.
Case
Lid
3. Use a soft sponge to clean the Water Filter.
Cover
Case
Water filter
Tank
Handle
Lid
once a week.
make sure to rinse the Water Filter once per week.
1. Pull the Case to remove it from the lid.
Tap
1. Pull the vacuum box out In order to take the products stored
in vacuum box, pull the vacuum box out.
2. For the following part, clean it with a piece of cloth soaked in warm water.
Aluminum tray
Vacuum box gasket
Vaccum box gasket
Vaccum box Case
Gasket Receiver
3. Assembly of Vacuum Box Case Assembly Attach Vacuum Box Case with
the core of Vacuum Box Door.
● If the detergent or any product other than warm water is
used for cleaning Vacuum Box gasket, there may be
effects in terms of deformation, color change or loss
● If Vacuum Box gasket is dropping or Vacuum Box Door
not well aligned, there may be the loss of vacuum property.
When Vacuum Box gasket is dirty.
1. Disassembly of Vacuum Box gasket out off Vacuum Box Case. Facing
the Vacuum Box, twist the knob of the Vacuum Box gasket on top right
Knob
2. Wipe gently with sponge on the stain with plain water.
Don’t use any detergent.
Please clean gasket track also.
gasket track
3. Wipe water out with dry cloth and leave the part until it is naturally dried.
4. Assemble Vacuum Box gasket, twist the knob to align with the gasket
track, deliberately assemble.
Knob
Packing track
Vacuum Compartment
and carefully remove.
CAUTION
Cleaning once a month
vacuum property.
Vaccum box Case
Core
●
Clean water tanks if they have not been used for 48 h;flush the water system connected to a water supply if water has not been
drawn for 5 days.