61
V
ar
io
us
F
un
ct
io
ns
Door Alarm and volume adjustment of the operation sound
Locking the Control Panel
Touch
button on the Control Panel to turn
on the indicator lamp.
All indicator lamps turn on, and then the current settings are displayed.
Touch
button on the Control Panel to turn
on the indicator lamp.
All indicator lamps turn on, and then the current settings are displayed.
Press down
button for 3 seconds or more
until the preset sound is heard.
The volume level of the operation sound is changed from “Standard” to “Louder”
or “Sound off” . Repeat the change of settings to set the operation sound you like
(see the table shown below). The sound is set to “Standard” before shipping.
Press down
button 3 seconds or more
until the preset sound is heard.
Lock of the Control Panel is changed to “On” or “Off” .
It is set to [
] “Off” before shipping.
1
1
2
2
●
It is impossible to adjust the volume level of
either door alarm or operation sound only.
●
When the Door Alarm is disabled, characters
on the Control Panel no longer blink.
●
Even if the volume level is set to “Sound off”,
the alarm of the Ice Maker Cleaning and the
operation sound when the AUTO DOOR of
the Refrigerator Compartment and the AUTO
DOOR are set to “ON” will sound.
●
When connecting/disconnecting the power
plug or after recovering from electric power
failure, it will return to the standard setting
where the Door Alarm sounds.
●
Electric pulling-out operation will not be
disabled even if the Lock function on the
panel for operation is set as On.
When stopping the setting of AUTO DOOR of
the Refrigerator Compartment and AUTO DOOR
(electrical drawer compartment), unlock the
Control Panel, and touch the
or
button for 3 seconds or more until it beeps
twice.
Pg.48, 49
●
When connecting/disconnecting the power
plug or after recovering from electric power
failure, lock of the panel for operation may
be released.
Notice
Notice
You can set the sound level of the alarm louder or no alarm sound.
This can prevent erroneous operation of the Control Panel or misuse by children.
When this indicator lamp
(Lock of the Control Panel) is illuminated, any other portion of the Control Panel will
not be activated by touching it.
Setting of the Control Panel's lock
“On”
(locked)
“Off”
(unlocked)
“
indicator lamp”
On
Off
Preset sound
Long beep
2 beeps
Door Alarm
When the door is opened for more than 1 minute, sound and light occur indicating the door is open as shown in the
table below.
For R-SF8800E, no Door Alarm is installed in the Upper Freezer.
※
When the door is left open for one minute or more, the indicator lamp blinks and the characters on the Control Panel is illuminated.
※
From 30 seconds onwards with the door opened, the Door Alarm sounds only when the energy saving mode is set. (The indicator lamp blinks when
the door is left open for one minute or more)
※
When the indicator lamp on the display area blinks due to the Door Alarm function, the Control Panel will not be activated by touching it.
Duration when door is open
1 minute
2 minutes
3 minutes
Alarm sound
Long beep (3 beeps)
Long beep (5 beeps)
Long beep (continuously), Louder
Volume level
Standard
Louder
Sound off
Standard
Preset sound
−
2 long beeps
Long beep
2 beeps
(Factory setting)
