54
When this indicator lamp
(Lock on the panel for operation) is illuminated, any button other than
ྫ
(Energy Saving) will not
be activated by touching it. This can prevent erroneous operation of the Control Panel or misuse by children.
■
Locking
Push and hold the
button for approximately
three seconds with all
the doors closed until
one beep sound.
is lit to indicate
that the lock has been
completed.
■
Unlocking
Push and hold the
button for approximately
three seconds with all
the doors closed until
two beeps sound.
is lit to indicate
that the lock has been
released.
[ eco OPERATION INDICATOR LAMP]/DOOR ALARM/LOCKING THE CONTROL PANEL
[“eco” Operation indicator lamp]
When the refrigerator is operated in a manner to reduce power consumption, such as Frost Recycle Cooling,
the indicator lamp is automatically lit to indicate that the refrigerator is operating in the energy saving mode.
When a door remains open for 30 seconds or more, alarm sounds as shown below and characters on the Control Panel are blinking to indicate that the door is open with sound and light.
When adjusting the volume of the door alarm
[
eco Operation indicator lamp]
[“eco” operation indicator lamp] can be turned off when you feel uneasy at night, etc.
■
How to turn off the
indicator lamp
Push and hold the
button
for three seconds with all the
doors closed until the [“eco”
Operation indicator lamp]
blinks.
The [“eco” Operation
indicator lamp] is unlit.
■
How to restore the setting
Push and hold the
button for
three seconds with all the doors
closed until the [“eco” Operation
indicator lamp] becomes lit.
The [“eco” Operation indicator lamp]
is lit for three seconds.
After that, the lamp is lit or unlit,
depending on the operation conditions.
Push this button and hold it for 3 seconds
Push this button and hold it for 3 seconds
●
If [“eco” Operation indicator lamp] isn’t illuminated, check the following things.
・
Is the [“eco” Operation indicator lamp] set as Off?
→
Perform the above-mentioned procedure for how to return.
・
Immediately after installation, when a lot of food is stored at a time, or when you open or close a door frequently, the compressor operates
at a high speed and this indicator lamp is not lit.
→
Open/close the door quickly or minimize the number of opening/closing the door.
・
When the refrigerator is operated with
ݨѾ࢝
(Quick Freezing) ,
ݨѾᕠ
(Quick Cooling) or
ݨఀყϕ
(Quick Ice Making)
enabled,
→
It will be illuminated after the quick cooling functions fi nish and the operation of the refrigerator gets stable.
・
In the
蔬果室強
(Vegetable Compartment (MAX)) mode
→
Stop the
蔬果室強
(Vegetable Compartment (MAX)) mode.
Pg.46
・
In summer, for example, when the ambient temperature around the refrigerator is high.
●
When connecting/disconnecting the power plug or after recovering from electric power failure, it will return to the setting
where the [“eco” Operation indicator lamp] is illuminated.
※
From 30 seconds onwards, the Door Alarm sounds
only when the energy saving mode is set.
The Refrigerator Compartment, Ice Compartment,
Lower Freezer and Vegetable Compartment have the
Door Alarm function (, but the Upper Freezer doesn t).
Notice
●
When connecting/disconnecting the power plug or after recovering from electric power failure, lock of the panel for
operation may be released.
Notice
Door Alarm
Locking the Control Panel
Duration when door is open
1 minute
30 seconds
ŏ
2 minutes
Alarm sound
3 long beeps
3 long beeps
5 long beeps
Control Panel
Does not blink
Flashing
Flashing
3 minutes
It keeps continuously sounding.
Flashing
●
Always confi gure the settings with all the doors closed.
Pg.36
Caution
■
You can set the sound level of the alarm louder or no alarm sound.
1. Push and hold the
button for three seconds with all the doors closed until two beeps sound (sound level of the alarm
gets louder).
2. Push and hold the
button for approximately three seconds with the sound level of the alarm until one beep sounds (The
alarm stops beeping).
When releasing the setting, perform the same operation with the alarm off. Two beeps sound, and then the setting is released.
●
When the Door Alarm is disabled, characters on the Control Panel no longer blink and operation sound is no longer made, but alarm
indicating cleaning of the ice-making tray does sound.
●
The Door Alarm is enabled as factory setting.
●
When connecting/disconnecting the power plug or after recovering from electric power failure, it will return to the standard setting
where the Door Alarm sounds.
Notice
Standard
Higher sound level of a door alarm
Door alarm off
2 beeps
2 long beeps
Long beep
1 beep
1 beep
2 beeps
Long beep
About
3 seconds
About
3 seconds
The indicator
lamp blinks
Indicator
lamp is ON
1 beep
・・・
Long beep
2 beeps
About
3 seconds
About
3 seconds
Push this button and hold it
for 3 seconds
Push this button and hold it
for 3 seconds
Indicator
lamp is ON
Indicator
lamp is OFF
