54
●
Before removing parts, take out all the foods on the parts.
●
Do not remove parts except the ones listed here.
Please contact with a Hitachi customer service centre for cleaning such parts after removing them.
HOW TO REMOVE/ATTACH PARTS
Caution
Door pocket
Fixed shelf
Chill room
Height adjustable lower shelf
Lift up the door pocket while tapping
the left/right of its bottom surface,
and remove it.
(It is fixed a little tightly.)
Insert the door pocket fully to the end when
installing it.
Draw the shelf, and pull off the 2 pins
on the lower right and remove it.
Pull out the case to the full, lift the front side slightly and then
remove it.
Slightly lift up and
pull out.
Door may get damaged if drawing the shelf straightforward.
Caution
Tap
Tap
Slide case
Caution
If it drops, it may break and cause bruise or injury.
Height adjustable upper and middle shelf
When installing the shelf, slide it until it reaches to the interior wall, then slightly lift up
the back of the shelf and push it in.
(hitch the forks of the shelf to the parts on the back of the shelf)
Slightly lift up the back
of the shelf and draw it.
Raise the shelf,
as shown in the
drawing.
Rotate and
remove it.
Forks of the shelf (Right / Left)
Door may damage if drawing the shelf without turning it.
Notice
Upper
shelf
Middle
shelf