Hitachi R-S42AMJ, Как пользоваться инструкцией

Страница: 49 / 56

49
Ice
Compartment
How to Maintain the Automatic Ice Maker
Ice tray
●
Maintain it once a year
1
Push the
製冰
button to stop supplying
water to the ice tray and turn on the
停止
indicator lamp. (Stop ice making)
Empty the ice tray and wash it lightly
in the stream.
Push the
製冰
button to turn on either
Large or Normal indicator lamp.
(Automatic Ice Making starts)
Open the Ice Compartment Door.
① Pull down the lever and ② draw the
frame.
③ Raise the cover ( ▲ part) in the
direction of the arrow.
④
Remove the ice tray from the frame.
※ If the indicator lamp fl ashes,
perform the following operation
after the “
停止 ” lamp is turned on
in 20 seconds.
2
3
Do not use
any cleaning tool that
can scratch it easily such
as scrubbing brush and
plate powder.
● Wash the water supply container thoroughly and replace it
after drying it if you stop ice making and you are not to use the
Automatic ice maker for a while.
● In particular, dry the water fi lter thoroughly.
Notice
Cover
4
▲ part
Frame
Lever
Is the lever in
horizontal state?
Lever
Horizontal
Click
①
Set the ice tray and
②
close the
cover.
③
Make the frame horizontal and
push it into the end, and
④ Pull up the lever.
Light ON
● If you cannot push the frame of the ice tray into the end, the ice tray drive motor may have operated.
Remove the ice tray once and push the frame in, and wait 1 minute after closing the Ice Compartment Door.
Preparation for the ice tray drive motor fi nishes, and you can set the ice tray.
Notice
■
Do not put your hand in the mechanical part
of the Automatic ice maker.
●
You may be injured when the Ice tray turns.
Warning
Push this button to turn
on the indicator lamp
Light ON
Press this button to turn on
the 停止 indicator lamp.