58
VARIOUS FUNCTIONS
(CONTINUED)
Set the condensation prevention heater to MIN.
(Swing partition/Partitioning iron plates)
Setting the condensation prevention heater to MIN saves energy.
When dew is formed in the swing partition or the partitioning iron plates, set it to the standard.
The temperature settings for the swing partition and the partitioning iron plates can be adjusted by four levels (1 to 4),
and level 4 is the most energy saving.
Setting the swing partition
Setting the partition iron plate
Open the door of the Lower Freezer Compartment.
Open the door of the Lower Freezer Compartment.
Touch
button on the Control Panel to turn on the indicator lamp.
All indicator lamps turn on, and then the current settings are displayed.
Touch
button on the Control Panel to turn on the indicator lamp.
All indicator lamps turn on, and then the current settings are displayed.
Close the door of the Lower Freezer Compartment.
Close the door of the Lower Freezer Compartment.
Press down
button for 3 seconds or more until the preset sound is heard.
The setting of MIN level of the dew condensation prevention heater will be switched.
Repeat the above-stated operation to set it to the level you prefer (see the table above).
Press down
button for 3 seconds or more until the preset sound is heard.
The setting of MIN level of the dew condensation prevention heater will be switched.
Repeat the above-stated operation to set it to the level you prefer (see the table above).
1
1
2
2
4
4
3
3
Swing partition
Partitioning iron plates
●
The setting will be returned to the standard when the power plug is disconnected and connected or power failure recovery takes place.
Notice
MIN setting of the
heater
Standard
MIN setting
level 1
MIN setting
level 2
MIN setting
level 3
MIN setting
level 4
Standard
Preset sound
−
Long beep
Long beep (2 beeps) Long beep (3 beeps) Long beep (4 beeps)
2 beeps
(Factory setting)
BB0048919X_R-F5700SH_A.indd 58
16.4.8 6:14:57 PM
