Hitachi R 18DL, Инструкции по безопасности и руководство пользователя, Страница: 10 / 44

English
10
BEFORE USE
1. Setting up and checking the work
environment
Check if the work environment is suitable by
following the precautions.
2. Mounting and dismounting the guard and
filter
Before using the appliance, check that the
filter is securely mounted. (Fig. 3)
Fig. 3
(1) Mounting
1
Match the outside diameter of the filter
to the inside diameter of the guard and
insert as far as the filter ring will go.
2
Match the shape of the guard (with the
filter attached) to the shape of the hole
in the dust case and insert as far as it will
go (6 points).
(2) Dismounting
To dismount the guard and the filter, follow
the above procedures in reverse.
3. Attaching and removing the suction opening
Insert the suction opening into the suction
port of the appliance as required. (Fig. 4)
ASSEMBLY AND OPERATION
APPLICATIONS
䡬
Light-duty vacuuming of dry surfaces
REMOVAL AND INSTALLATION
METHOD OF BATTERY
䡬
How to install the battery.
Align the battery with the groove in cleaner
handle and slip it into place.
Always insert it all the way until it locks in
place with a little click, If not, it may
accidentally fall out of the cleaner, causing
injury to you or someone around you (Fig. 2).
䡬
How to remove the battery.
Withdraw battery from the cleaner handle
while pressing the latch (2 pcs) of the battery
(Fig. 2).
<R18DL>
<R18DSL>
Fig. 2
CHARGING
For rechargeable batteries, please charge in
according to the handling instructions of the
charger which you are using.
Guard
Knob
Knob
Filter
Handle
Latch
Insert
Pull out
Push
Battery
(Optional accessory)
Filter
Knob
Guard Dust case
Release button
Ribs (6pcs.)
Handle
Insert
Pull out
Push
Battery
(Optional accessory)
Latch
01Eng_R18DL_US.p65 7/18/12, 9:40 AM 10