Hitachi PV-XEH900 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 40

background image

E-37

The battery is a consumable item. When the usage time of the battery becomes short even when properly
charging, the life of the battery has reached its end. Please replace the battery. Consult with your Hitachi
authorized service agent when replacing the battery without disposing of the unit due to the life of the
battery reaching its end, etc.

Replacement of the battery

DANGER



Do not connect the battery to devices other than this body.
Also, do not disassemble, modify, or solder the battery, or charge the battery on its own.

Doing so might cause leaking, heat generation, rupture, smoke, fire, electric shock, or injury.



Do not detach the battery while the body is in operation.

Doing so might cause smoke, fire, electric shock, or injury.

If a battery other than
the exclusive battery is
used, the performance
and quality of the vacuum
cleaner is not guaranteed.

Problem

Things to check

Instructions

Page

The battery indicator lamp

flashes quickly (about four times

per second) when the body is

set on the changing station.

Is the battery correctly attached to
the body?

Remove the unit from the charging station, fully attach
the battery, and set the unit in the charging station again.

P.E-2

Either the battery is consumed, or the battery or charging station is
damaged. Please consult with the Hitachi authorized service agent.

-

The battery indicator

lamp flashes quickly

(about four times

per second).

Is the battery correctly attached to
the body?

Correctly attach the battery to the
body and start the operation again.

P.E-2

Quick flashing of the battery indicator lamp (about four times per second) indicates that either the battery
is consumed or the battery is damaged. So please consult with the Hitachi authorized service agent.

-

It takes a long time

to charge.

Is the body hot when it is set on the
charging station?

The safeguard is operating, which is normal.
When fully charged, the battery indicator lamp turns off.

P.E-11

Is the room temperature lower than
5°C or higher than 35°C?

Charge in areas where the room
temperature is between 5°C and 35°C.

P.E-12

Charging time of battery might be longer according to the usage environment
and conditions such as the ambient temperature and usage frequency.

-

If the battery indicator lamp doesn't disappear even after charging the battery for over 7 hours,
the device might be damaged, so please consult with the Hitachi authorized service agent.

-

If the problem persists

Do not attempt to repair it yourself. Please

consult with the Hitachi authorized service agent.

-

Replacement of the battery and disposing of the product



Battery exclusive for the Hitachi electric vacuum cleaner

Model: PVB-2125B
Please choose service part PV-XEH900-906.

Troubleshooting

Replacement of the battery

and disposing of the pr

oduct

«
...
35
36
37
38
39
...
»

Содержание PV-XEH900









































Отзывы:

Нет отзывов

Похожие инструкции для PV-XEH900

Бренд: Mienta Страницы: 68

Бренд: Kärcher Страницы: 26

Бренд: Simplicity Страницы: 45

Бренд: Johnson Страницы: 32

Бренд: Rowenta Страницы: 81

Бренд: YATO Страницы: 64

Бренд: Kärcher Страницы: 28

Бренд: SharkNinja Operating Страницы: 2

Бренд: Zelmer Страницы: 64

VC-17703050-BSTR

Бренд: Singer Страницы: 36

Бренд: TCS Страницы: 8

Бренд: Vax Страницы: 6

Бренд: Dirt Devil Страницы: 12

Бренд: Mi Страницы: 22

Бренд: Ugin Страницы: 20

Бренд: Hoover Страницы: 32

LITTLE GREEN PROHEAT

Бренд: Bissell Страницы: 19

Бренд: Domo Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды