Hitachi PJ-TX100 Скачать руководство пользователя страница 24

Страница: 24 / 65

PJ-TX100(C11H)

Replacing the Lamp

If the indicators or a message prompts you to replace the lamp, replace the lamp as soon as possible.

1. Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at least 45 minutes.

2. Contact your dealer to prepare a new lamp. Tell the dealer your lamp type number:

DT00661

If the projector is mounted on the ceiling, or if the lamp has broken, also ask the dealer to replace the lamp.

In the case of replacement by yourself,

3. After making sure that the projector has cooled adequately, slowly

flip over the projector, so that the bottom is facing up.

4. Unscrew the screw (marked by arrow) of the lamp cover, the slide

and take the lamp cover up.

5. Unscrew the 2 screws (marked by arrow), and slowly pick up the

lamp by the handles.

6. Insert the new lamp, and retighten firmly two screws unscrewed in

the previous process to lock it in place.

7. Slide the lamp cover into place, and retighten firmly the screw of the

lamp cover unscrewed in the process number 4.

8. Turn on the projector power, and reset the lamp timer.

(1) While the projector running, press the MENU button to open the

menu. If EASY menu appears, move to ADVANCE menu.

(2) Choose the “OPTION” on the menu using the ▲/▼ button, then

press the ► button or ENTER button.

(3) Choose the “LAMP TIME” using the ▲/▼ button, then press and hold the RESET button for 3 seconds.

(4) Choose the “RESET” using the ▲ button.

NOTE

• When the lamp has been replaced after the message of “THE POWER WILL TURN OFF AFTER

0hr.” is displayed, complete the following operation within 10 minutes of switching power on.

• Incorrectly resetting of the lamp timer (resetting without replacement, or neglect of resetting after replace-

ment) will result in incorrect message functions.

Bottom side

Lamp cover

Screw of the lamp cover

Screw

Handles

Содержание PJ-TX100


































































Результаты поиска

Содержание PJ-TX100

Отзывы:

Похожие инструкции для PJ-TX100

Бренды по названию

Популярные бренды

Hitachi PJ-TX100, Руководство по обслуживанию

Результаты поиска

Содержание PJ-TX100

Отзывы:

Похожие инструкции для PJ-TX100

Бренды по названию

Популярные бренды