– 10 –
COOLING OPERATION
Use the device for cooling when the outdoor temperature is -10 to 46°C.
If humidity is very high (over 80%) indoors, some dew may form on the air outlet grille of the indoor unit.
■
As the settings are stored in memory in the remote controller, you only
have to press the
(START/STOP) button next time.
1
2
3
START
STOP
Press the FUNCTION selector so that the display indicates
(COOL).
Set the desired FAN SPEED with the
(FAN SPEED) button
(the display indicates the setting).
(AUTO)
: The FAN SPEED is HI at
fi
rst and varies
to MED automatically when the preset
temperature has been reached.
(HI)
: Economical as the room will become cool
quickly.
(MED) :
Quiet.
(LOW) :
More
quiet.
(SILENT)
:
Silent.
Set the desired room temperature with the TEMPERATURE
buttons (the display indicates the setting).
The temperature setting and the actual room temperature may
vary somewhat depending on conditions.
Press the
(START/STOP) button. Cooling operation starts
with a beep. Press the button again to stop operation. The
cooling function does not start if the temperature setting is
higher than the current room temperature (even though the
(OPERATION) lamp lights).
The cooling function will start as soon as you set the temperature
below the current room temperature.
RAS/RAC-PH30HLT (1-16).indd 10
RAS/RAC-PH30HLT (1-16).indd 10
