Hitachi OE700 Series Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 77

background image

Hitachi High-Tech Analytical Science

►

1

1 Notes regarding the use of this operating manual

1

Notes regarding the use of this operating
manual

This chapter contains information regarding this operating manual as well as general
safety instructions for handling the instrument.

Information

Due to the customer-specific configuration of all spectrometers, the matrices and/or
grades displayed on your screen can deviate from the illustrations and descriptions in
this manual and in the software manual.

If not indicated otherwise, we assume that the user has already started the
WINDOWS™ operating system. Basic knowledge as to handling software under
WINDOWS™ is assumed as given.

1.1

Validity of the operating manual

This operating manual is valid for the stationary optical emission spectrometer OE700
series.
This operating manual is only valid in combination with the "SpArcfire" software manual.

Observe this operating manual for all work. If the instrument is not used according to this
operating manual, your safety as well as the instrument function can be affected.
To maintain product reliability, enhance the life cycle and avoid downtimes, do in any
case observe the instructions herein.

Furthermore observe the current valid regulations for accident prevention and
environmental protection as well as the recognised technical rules for safe working
according to good professional practice.

1.2

Pictograms and signal words

Important information in this operating manual is marked with the following pictograms.

DANGER

... indicates a hazardous situation which, if not avoided, will result in death or serious
injury.

WARNING

... indicates a hazardous situation which, if not avoided, could result in death or serious
injury.

CAUTION

... indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury.

«
...
9
10
11
12
13
...
»

Содержание OE700 Series














































































Отзывы:

Нет отзывов

Похожие инструкции для OE700 Series

Бренд: Keithley Страницы: 73

Charge Analyzer 711

Бренд: 3M Страницы: 24

Бренд: Narvitech Страницы: 2

Бренд: QuadTech Страницы: 76

Professional Plus

Бренд: YSI Страницы: 28

Бренд: Sage Страницы: 68

CoolPoint CP12-V8

Бренд: UFM Страницы: 14

Nitro-Save NS16

Бренд: TDI Страницы: 4

Бренд: Hanna Instruments Страницы: 28

Бренд: Omega Страницы: 4

Бренд: LaMotte Страницы: 32

Бренд: X-Rite Страницы: 21

Бренд: DeNovix Страницы: 93

Бренд: Bartington Страницы: 32

Бренд: Alfano Страницы: 47

ENSEMBLE GRANDE MARK 5

Бренд: Kurzweil Страницы: 32

Бренд: Hanna Instruments Страницы: 2

Бренд: Omega Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды