Hitachi NR 83AA2, Технические данные и руководство по обслуживанию

Страница: 29 / 37

--- 26 ---
10-4. Disassembly and Reassembly of the Driving Section and the Magazine Section
(1) Nose [33], Pushing Lever [46] and the related parts (See Fig. 18.)
Tool required
Hexagon bar wrench (5 mm)
(a) Disassembly
Perform disassembly according to 10-2-(3) to remove the Nose [33], Pushing Lever [46], and the other
parts.
Remove the Nose Rubber [61] from the Nose [33] by stretching the Nose Rubber [61] with a thin rod.
(b) Reassembly
Disassembly procedures should be followed in the reverse order. Note the following points.
Be careful of the mounting direction of the Nose Rubber [61]. Mount the Nose Rubber [61] aligning with the
shape of the Nose [33].
Hook the Spring [45] in the 3 mm dia. hole of the Nose [33] aligning with the shape of the Pushing Lever
[46]. (The Nose [33] has two 3 mm dia. holes, one is for hooking the Spring [45] and the other is for the
depth adjustment pushing lever kit (optional accessory).)
Do not insert a roll pin into the other 3 mm dia. hole. This hole is for the depth adjustment pushing lever kit
(optional accessory).
Fig. 18
3 mm dia. hole
Nose Rubber [61]
Safety Bolt [44]
Nose [33]
Nylock Hex. Socket
Hd. Bolt M8 x 22 [32]
Spring [45]
Nut M5 [47]
Pushing Lever [46]