Hitachi NR 83A2 Скачать руководство пользователя

Страница: 11 / 46

--- 8 ---

7. PRECAUTIONS IN SALES PROMOTION

In the interest of promoting the safest and most efficient use of the Model NR 83A2 Nailer by all of our customers,

it is very important that at the time of sale the salesperson carefully ensures that the buyer seriously recognizes

the importance of the contents of the Instruction Manual, and fully understands the meaning of the precautions

listed on the Warning Label attached to each tool.

The Model NR 83A2 Nailer is designed for continuous nail driving (however, some of the Model NR 83A2 are

designed for single-shot operation only for some destinations). At time of sale, the salesperson must inform the

customer that the sequential trip mechanism kit which can change the Model NR 83A2 to a single-shot nailer is

optionally available, and recommend it to the customers who want to use it. Refer to the leaflet attached together

with the Instruction Manual for details.

7-1. Instruction Manual

Although every effort is made in each step of design, manufacture, and inspection to provide protection against

safety hazards, the dangers inherent in the use of any pneumatic tool cannot be completely eliminated.

Accordingly, general precautions and suggestions for use of pneumatic tools, and specific precautions and

suggestions for the use of the pneumatic nailer are listed in the Instruction Manual to enhance the safe, efficient

use of the tool by the customer.

Salespersons must be thoroughly familiar with the contents of the Instruction Manual to be able to offer

appropriate guidance to the customers during sales promotion.

7-2. Warning Label

Each Model NR 83A2 unit is provided with a Warning Label (illustrated below) which lists basic safety precautions

in its use. Carefully ensure that customers fully understand and follow these precautions before using the tool.

Содержание NR 83A2















































Результаты поиска

Содержание NR 83A2

Отзывы:

Похожие инструкции для NR 83A2

Бренды по названию

Популярные бренды

Hitachi NR 83A2, Технические данные и руководство по обслуживанию

Результаты поиска

Содержание NR 83A2

Отзывы:

Похожие инструкции для NR 83A2

Бренды по названию

Популярные бренды