4-2
Performing Storage Navigator Operations
Hitachi Universal Storage Platform V/VM Hitachi Storage Navigator User’s Guide
Editing the Storage Device List
Cautions:
•
Only a storage administrator with the
Enable
authority of
Storage
Administrator Role
can edit the storage device list.
•
If you edit the storage device list to change the settings, you must back up
the Storage Navigator configuration file by downloading the file from the
SVP. For instructions on downloading the configuration file, see
Downloading the Configuration Files.
Adding a New Storage Device
To add a new storage device (storage system):
1.
On the Web browser of the Storage Navigator computer, access the URL of
the primary SVP to open the Storage Device List dialog box.
2.
On the Storage Device List dialog box, click the
Edit
button (
).
The login dialog box is displayed.
3.
Enter the user ID and password, and click
Login
.
The Storage List Editor dialog box is displayed (see Figure 3-20).
If the SVP is set to support SSL-encrypted communication, security
messages might appear. For details, see Using SSL-Encrypted
Communication.
4.
Click
New Entry
to open the Storage Entry dialog box (see Figure 4-1).
5.
On the Storage Entry dialog box, fill in all the information about a storage
system you want to add. See Table 3-8 for detail on format.
–
You can enter only one of these (a host name, IPv4 address, or IPv6
address) for
Host Name / IP Address
.
–
You can use
HTTP Block
to block HTTP communication in the
environment supporting the encrypted communication by SSL
communication (HTTPS). For more detailed information, see the
Encrypted Communications User's Guide
.
6.
Click
Submit
to register the entry.
A confirmation message is displayed.
7.
Click
OK
to register, or click
Cancel
to cancel.
When the entry is registered successfully, a completion message is
displayed.
8.
Click
Close
.
The new entry is added to the end of the list on the Storage List Editor
dialog box.
9.
On the Storage List Editor dialog box, click the
Logout
button (
).
You return to the Storage Device List dialog box.
