EN
14
CH
/
Press and release
CH /
. The TV automatically stops at the
next channel.
For proper operation, before selecting channels, they should be
set into the memory. See “Channels setup” on page 18.
INFO/
Press
INFO
to display the current information on the screen.
When the TV receives a digital signal, the digital information will
appear.
• Channel number
• DTV Signal condition
• Channel label (if preset)
• Broadcast program name
• Parental Control
• Signal Type
• Program guide
• Current date and time
• Resolution
• Audio language
Press
INFO
again to clear the display.
LAST CH
This button allows you to go back to the last channel selected by
pressing
LAST CH
. Press
LAST CH
again to return to the channel
you were watching.
MUTE
Press
MUTE
to switch off the sound. The TV’s sound will be
silenced and MUTE icon will appear on the screen. The sound can
be switched back on by pressing this button again or by pressing
the
VOL (VOLUME ) +
button.
Quick guide for menu
operation
Example: Select Menu Language.
1
Press
INPUT
to select TV mode.
2
Press
MENU
. The TV menu screen will appear.
3
Press ◀ or ▶ to select “Setup”, then press
SELECT
.
4
Press ▲ or ▼ to select “Menu Language”, then press
SELECT
.
5
Press ▲ or ▼ to select desired language.
6
Press
EXIT
to return to the normal screen.
NOTE:
• On the following pages, the menu can be called in the same way
described above, by pressing the
MENU
button.
• If no buttons are pressed for more than about 30 seconds, the
TV will return to normal viewing automatically.
• During TV or external input mode (except PC input mode), if
there is no signal reception, the TV will change to standby after
approx. 15 minutes (in PC input mode: 1 minute).
