Hitachi LE40A509, Руководство пользователя

Страница: 8 / 10

8
How to attach the stand
How to remove the stand / Wall mounting
When you transport this product, remove the stand and pack it flat against the back of the
unit in the carton. To remove the stand, perform the above steps in reverse order.
When you mount the TV on the wall, remove both stands (R and L). To disconnect the stand
remove the screws from the bottom of TV.
NOTE:
• Assure the AC cord is not connected to an AC outlet.
• Before beginning this process, make sure that you have a clean, safe, and cushioned
space to work at to avoid any damage to the unit.
• Do not touch or press the LCD screen, the glass might break under pressure.
1
Carefully place the TV screen face-down on a clean, cushioned surface.
2
Insert and secure the stands (R and L) with 1 screw (supplied) (M8x16mm) each side as
shown in Figure 1.
• Be sure to follow the above instructions. Insufficient tightening or incorrect installation of
the stand will not support your TV correctly, and could result in damage or injury from tip-
over.
Wall mounting:
• Before wall mounting, please carefully check the location of the TV’s mounting-holes.
• If the unit is to be mounted on the wall, contact the retailer where you purchased the
TV for advice, and have the equipment professionally installed. Incomplete or improper
installation may cause injury to you, and/or damage to the TV. The screws ISO M6 thread
type should be us ed. The insertion length must be 11~13mm for Top Wall Mount Hole and
10~11mm for Bottom Wall Mount Hole. If the insertion length is less than or more than
specified above, the weight can not be maintained or a spac e is created between the Wall
Mount Bracket and the Television.
(Insertion Length) = (Screw Length) - (Washers Thickness) - (Mounting Bracket Thickness)
Figure 1
Stands
L R
Stands
Screws
L
R
Screws
Top Wall Mount Hole
Bottom Wall Mount Hole