38
MAIN MENU OPERATION (continued)
Picture Menu (TV/AV mode) (continued)
Selected Items
Setup hint
MPEG NR*
Off
This is a noise reduction system for MPEG picture signal.
(ex. against mosquito noise and block noise.)
Low
High
Back Light
0~100%
Adjust the brightness of the Back Light for the maximum
visibility.
Reset
Each item on this menu screen can be restored to the
original factory settings by pressing
OK
button.
Cross Colour NR
Off
This reduces noise caused by colour mixture of adjacent
pixels.
This is not available when “Game Mode” is On.
Low
High
Game Mode
Off
This reduces the time-lag of speed whilst moving images
are displayed during TV game play.
This is not available in TV or DTT mode.
On
Reset
Each item on this menu screen can be restored to the
original factory settings by pressing
OK
button.
Colour Management*
On
Magenta
On: Turn On to adjust the balance of each colours
depending on the user’s preference. The settings
refl ect in each of the 4 Colour Temperature modes.
Reset: Each item on “Colour Management” can be
restored to the original factory setting.
Off: Remains as default setting.
Red
Yellow
Green
Cyan
Blue
Off
Colour Temp. Adjust*
On
Drive
On: When you want to set specifi c adjustments in each of
the 4 Colour Temperature modes. You can adjust on
the Drive and Cutoff. The settings refl ect on the
Colour Temperature.
Drive: Subdue the following colours on the brighter
parts.
Cutoff: Subdue the following colours on the darker
parts.
Reset: Each item on “Colour Temp. Adjust” can be
restored to the original factory setting.
Red
Green
Blue
Cutoff
Red
Green
Blue
Off
Off: Remains as default setting.
NOTE
About Smooth Movie, the image might not look natural depending on the image contents.
Phenomena such as
• As switching the subtitles of a fi lm or images, the image displays with fi ne horizontal streak lines.
• As switching the scenes such as commercial and animation, the image displays with fi ne horizontal streak lines.
• When displaying a ticker or subtitle, the text on the image becomes rough (aliasing).
• When you watch the image form AV input which is connecting to any external equipment, the OSD of external
equipment displays with fi ne horizontal streak lines.
These phenomena occur due to the method of converting the image.
Please note that this is not malfunction.
In case that it is disturbing, please set to Off.
In addition, the effect of this menu might vary depending on the size switching (See
59
~
61
).
Also, this might be ineffective depending on the scene of image.
