Once the TV has found all your local stations, they are then automatically
assigned a programme numberand name, if available from the broadcast.
important note before starting Auto Setup
important note.
start A.P.S. (Auto Programming System)
If you have a Video Cassette Recorder or a Satellite receiver connected to your TV please
ensure that they are switched on before automatic tuning begins. In the case of a VCR, insert
a pre-recorded tape and begin playback of your equipment. These measures ensure that all
your external equipment is tuned in during the Auto Setup procedure.
When the TV is turned on for the first time, it is in the digital mode.
Because this is the first time the TV is used, there are no channels stored
in the memory and the following message appears on the screen.
1
2
3
5
After APS is finalized, the programme table will appear on the screen. In the
programme list you will see the programme numbers and names assigned to
the programmes.
4
Yes
No
MENU
BBC ONE
BBC TWO
BBC CHOICE
Searching UHF channels 30. Please wait. This will take a few minutes
Cancel searching
AUTOMATIC SEARCH
Channels:
12 %
To start installation process, select
“Yes”,
to cancel select
“No”.
This process
will take about five minutes. To cancel searching, you can press “
(MENU)
”
button at any time during the process.
After
Automatic Search
process is completed, a message asking for
analogue channel search appears on the screen. To continue Auto Program,
first set the language, country and teletext language by using /
button and
then press the RED or “
OK
” button
|
}
For details, please refer to the
Install Menu
section of the instruction book.
Country
Language
UK
Ok
Cancel
PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
TXT Language
UK
P 03 - C 04
63.75 MHz
6%
63.75 MHz
Cancel
APS is running...
Please ensure aerial is plugged in. Do you
want to start first time installation?
