Hitachi L32A102 - LCD Direct View TV, Руководство пользователя

Страница: 13 / 30

13
• Cable -Cable TV channels.
4 Press MENU one or more times to close
the menu.
Changing channels
To change channels:
• Press the CH+ or CH- on the side of your TV
or the CH or CH on the remote
control.
To enter a channel number directly:
• Press the number buttons on the remote
control.
In digital TV mode, a main (major) channel
can have one or more sub. (minor) channels.
Press the number buttons to enter the main
channel, press the
– button (to the left of the 0
button), then press the number button for the
sub-channel. For example, if you want to
watch channel 5-2, press
5 , press the –
button, then press 2 .
To go to the previous channel:
• Press LAST CH .
Using the on-screen menus
Use your remote control to navigate in the
on-screen menus.
To use the on-screen menus:
1 Press INPUT on the remote control to select
the video source.
2 Press MENU on the remote control. The
on-screen menu appears.
3 Press
/
to highlight the Video , Audio,
Channel , Timers , Locks , or Setup icon,
to enter the menu.
4 Press / to highlight a setting, then press
/ to change the setting.
5 Press MENU one or more times to close the
menu.
Scanning Channels
To select channels with the CH buttons, your TV
first needs to scan the channels. When your TV
scans channels, it scans for channels with
signals, then stores the channel information into
memory.
To automatically scan channels:
1 Press MENU on the remote control, then
press
/
to highlight Channel icon. The
2 Press to enter the Channel menu.
3 Press
/
to select Auto Scan , then
press . The
Auto Scan sub-menu opens.
4 Press / to select the type of auto scan
you want:
• Scan all
• Digital Channels
• Analog Channels
Then press to start the auto scan. Your
TV scans for and memorizes all channels
available in your area.
5 To stop the auto search, press MENU .
When auto search is finished, the channel
changes to the first channel in the memorized
channel list.
then press
Channel menu opens.
Move
Return Select MENU
Channel
Digital Channels
Analog Channels
Scan All
Note
The Channel List cannot be updated by only
changing the cable source. Auto Scan must be
performed for the Channel List to be updated.
IMPORTANT NOTICE
United States federal law requires broadcasters to stop transmitting
analog (non-digital) television signals after February 17, 2009.
Accordingly, this TV’s analog tuner will not be capable of receiving
over-the-air analog television broadcasts after such analog
broadcasts are no longer available.
After February 17, 2009, this TV’s analog tuner will continue to
work with compatible cable and satellite TV systems, gaming
consoles, VCRs, DVD players and other similar products.
Both before and after February 17, 2009, this TV’s digital tuner will
receive available over-the-air digital television broadcasts using an
antenna and other digital television broadcasts using compatible
cable, satellite or other digital television system connections.
Please review this Operating Guide for further information
regarding such connections.
Hitachi supports the DTV transition and as a member of the DTV
Transition Coalition urges consumers to visit these web sites for
interactive guides and further detailed information:
www.dtvtransition.org • www.dtv2009.gov •
www.myceknowhow.com • www.youtube.com •
Move
Return Select MENU
Channel
TV Source
Auto Scan
Favorites
List
Channel No.
Channel Label
Cable
1-2
Sencore
DTV Signal Strong