KP-M2RU Specification (EIA)
Sensor pick up device:
1/2" Interline transfer CCD
Sensing scanning area:
6.45 (H) x 4.84 (V) mm
Total number of pixels:
811 (H) x 508 (V)
Number of effective pixels:
768 (H) x 494 (V)
Pixel pitch:
8.4 (H) x 9.8 (V) µm
Scanning system:
2:1 interlaced / 525 lines / 60 fields per second / 30 frames per second or
non-interlaced (only in external sync mode or with modification)
Scanning frequency:
15.734 kHz (H), 59.94Hz (V)
Signal standard:
EIA Monochrome
Sync system:
Internal or external (automatic switching)
External sync input:
HV/VD 2 to 6 volts p-p input impedance 1kohm, frequency deviation ±1%, negative
polarity
Resolution:
570 (H), 575 (V) TV lines
Standard sensitivity:
30 lux @ f4 (3200K)
Minimum sensitivity:
0.3 lux at f1.4 (with AGC on, gamma 0.45)
Electronic Shutter:
off, 1/100th, 1/125th, 1/250th, 1/500th, 1/1,000th, 1/2,000th, 1/4,000th, 1/10,000th
(selectable by external switch)
Gamma correction:
0.45 or 1.0 (selectable by internal switch)
Signal to noise ratio:
56dB
AGC:
Normal or AGC (selectable by internal switch)
Video output:
VS 1.0 volt p-p 75 ohms unbalanced. (0.7 volts p-p video and 0.3 volts p-p sync negative
polarity)
Integration mode:
Field or frame integration (selectable by external switch)
Field on demand function:
Switchable on/off by internal switch
Restart reset operation:
On/Off selectable by component change
Lens mount:
C
Flange focal distance:
17.526 mm
Ambient temperature and humidity:
Operating:
-10º C to +50ºC, RH 90% or less
Storage:
-20º C to +60ºC, RH 70% or less
Resistance to vibration:
9G max (10 to 60Hz amplitude constant at 0.98mm)
7G constant (60 to 200Hz amplitude variable), 10 to 200Hz (sweeping for one minute, each of X,Y and Z
directions for 30 minutes)
Dimensions:
44 (W) x 29 (H) x 72 (D) mm
Weight:
120 grams (approx)
Supply voltage:
12 volts dc ±1 volt
Current consumption:
180 mA (approx)
Composition:
Camera head (with dummy glass AR coated), operation manual
Design and specification are subject to change without notice