5
Functions and operations
Various mode setup and adjustment of KP-F500PCL/SCL are performed by the remote control via CameraLink.
Operation and adjustment way of function utilized in KP-F500PCL/SCL are described below.
See "Remote control" (page 7 to 15) about communication method of each command.
1. Main functions
(1) TRIGGER : Setting about external trigger
・MODE : Select of mode
OFF (Factory setting）
: Trigger mode set to OFF (normal mode).
FIXED SHUTTER
: Set to Fixed shutter mode.
ONE TRIGGER
: Set to ONE trigger mode.
VD CONTROL
: Set to VD reset mode.
・POLARITY : Select of trigger polarity
POSITIVE (Factory setting) : Input polarity HIGH is made into trigger signal.
NEGATIVE
: Input polarity LOW is made into trigger signal.
・SOURCE : Select of trigger source
CL-CC1 (Factory setting) : Input trigger signal from CameraLink signal CC1 (see page 4 "Connector").
12pin
: Input trigger signal from 12 pin connector.
* See "Trigger operation and timing chart" (page 23 to 25).
(2) OUTPUT SIGNAL : Setting of output signal from 12 pin
OFF (Factory setting)
: No output.
FLASH OUT
: Output flash pulse (strobe out).
VD
: Output camera VD.
(3) SHUTTER : Setting of electronic shutter
OFF (Factory setting)
: Shutter operation set to OFF (normal shutter).
1/16, 1/60, 1/100, 1/250,
1/1000, 1/2000,
1/10000, 1/50000 second : Set to setting shutter speed (PRESET shutter).
VARIABLE
: Set to shutter speed from 10 second to 1/100000 second (VARIABLE shutter).
-VARIABLE VALUE- : Setting speed of VARIABLE shutter.
10 to 1/100000 second
: Electronic shutter can be set in the range of 10 to 1/100,000 second in 1536 steps.
Shutter speed setting value can be derived as follows. (
ShutterSpeed:: μsecond)
a) Setting value xyy obtained from exposure time.
⎟⎟
⎠
⎞
⎜⎜
⎝
⎛
×
⎟
⎠
⎞
⎜
⎝
⎛
−
=
−
=
+
9
100
1
10
1
h
ed
ShutterSpe
ed
ShutterSpe
1
X
YY
X
int
))
int(log(
b) Exposure time obtained from setting value.
sec]
)[
9
100h
yy
1
(
10
1
x
µ
×
+
×
=
+
ed
ShutterSpe
Содержание KP-F500PCL
Страница 2: ......
