Hitachi KH530B, Инструкция по эксплуатации

Страница: 18 / 28

DAB Operation
If the unit is connected to the mains power for the first time, the unit will
show “Welcome! Digital Radio“ and then “00:00:00 Time is not set”.
Press the STANDBY button to switch on the unit and perform auto scan.
During the scan the display will show “Scanning…” together with a slide
bar that indicates the progress of the scan and the number of stations that
have been found so far.
Once the scan has finished, the unit will select the first alphanumerically
found station. To explore the found stations, press TUN/CH and then
SELECT to confirm selection.
Full Scan
The full scan will search for the entire DAB Band III channels. After the scan
has finished, the first alphanumerically found station will be automatically
selected.
Full scan will not replace the DAB stations in memory. If you want to
remove all the previously scanned stations, factory reset is required.
1. To activate full scan, press and hold MENU/INFO then TUN/CH to
select <Full scan>. Press the SELECT button to confirm. The display
will show “Scanning…” and a progressing slide bar.
2. All the stations that have been found will be stored automatically. To
explore and listen to the found stations, press TUN/CH and then
SELECT to confirm selection.
Manual Tuning
Manual tuning can help add stations that were missed by full scan.
1. Press and hold MENU/INFO and then TUN/CH to select <Manual
tune>. Press SELECT to confirm.
2. Press TUN/CH to scroll through the DAB channels, which are
numbered from 5A to 13F.
3. Press SELECT to select the station that you would like to listen to.
18
GB