Hitachi IR.LINK, Руководство пользователя

Страница: 64 / 103

4 OPERATION
4-21
Note: The user should perform interrupt task registration by using the CPMSE debugger
system for the S10mini or the RPDP/S10 for the S10V. Release interrupt tasks by the
user program. (Incorporate the interrupt task release processing in the initial task.)
When the user does not release interrupt tasks, a task start does not take place. When
an unregistered task number is specified to an interrupt task (only registration from the
[Enter interrupt task] window), a program error will occur.
4.3.4 Refresh cycle monitor
Function: The I/O refresh cycle time is monitored (measured).
Operation: The procedure is shown below.
(1) On the [IR.LINK SYSTEM] window (Figure 4-2) or [ [S10V] IR.LINK SYSTEM] window
(Figure 4-3), click the Refresh cycle monitor button.
(2) The [Refresh cycle monitor] window is displayed (Figure 4-18).
Figure 4-18 Refresh Cycle Monitor Window
(3) To start monitoring, click the Start monitoring button. To stop monitoring in the
monitoring status, click the Stop monitoring button.
To exit the [Refresh cycle monitor] window, click the Close button.