Hitachi HV-C20, Руководство по эксплуатации

Страница: 7 / 19

Specifications
(1) Color format NTSC/PAL
(2) Optical system 1/2 , f1.6 prism Optics
(3) Imaging system RGB, 3 CCD s
(4) Imaging device 1/2" CCD
No. of total pixels NTSC: 811(H) X 508(V) PAL: 795(H) X 596(V)
No. of effective pixels NTSC: 768(H) X 494(V) PAL: 752(H) X 508(V)
Sensing area 7.95(H) x 6.45(V)mm
(5) Sync system Internal or genlock (automatic switching)
(6) Horizontal resolution 700 TVL (Y, at center) 680 TVL (RGB)
(7) Signal-to-noise ratio NTSC: 60dB typ. PAL: 58dB typ.
(Gamma:1, DTL:OFF, gain:0dB)
(8) Standard sensitivity 2000 lx, f8
(9) Minimum illumination 5.5 Ix
(10) Gamma 0.45 or 1.0
(11) Preset color temperatures 3200K and 5600K
(12) Vertical contour correction 1H
(13) Lens mount C-mount
(14) Selectable gain 0 to 18dB (in 1dB steps or AGC)
(15) Electronic shutter
Preset mode: 1/100(1/120 PAL), 1/250, 1/500, 1/1,000, 1/2,000,
1/4,000, 1/10,000s
Lock scan mode: 1/60.38(1/50.31 PAL) to 1/10,168s (1/10,040 PAL)
AES mode: OFF to 1/10,000s (in 1H steps until 4 lens stops)
Long time integration: NTSC:1/30 to 1s (30 steps) PAL:1/25 to 1s (25 steps)
(16) Color bars Full bars
(17) Power supply 12V DC (10.5 to 17V)
(18) Power consumption 4.5W approx.
(19) Ambient temp. Operation: -1 0 to 45 C Storage: -2Q to 60 C
(20) Dimensions 65(W) X 65(H) X 130(0)mm
(21) Mass 600g approx.
*1 Flange focal distance = 17.526mm *2 A memory is required to obtain images continuously.
Input/output
(1) Input
Genlock signal VBS:1.0Vp-p + 3dB or black burst/75
or high (sync: 0.3± 0.1Vp-p, burst:0.3± 0.1Vp-p)
Serial data input 1.5Vp-p/high, 4-pin
(2) Output signals
Composite video signal VBS; 1.0Vp-p/75ohm, BNC
Y/C signals Y: 1.0Vp-p/75 ohm
C: 0.286Vp-p (burst) 75 ohm
S: connector
RGB signals R: 0.7Vp-p/75 ohm / G: 0.7Vp-p/75 ohm / B: 0.7Vp-p/75ohm
D-sub
Sync signal HD: 2Vp-p/75Q VD: 2Vp-p/75Q D-sub
Serial data 1.5Vp-p/low, 4-pin