background image

16

8. Compliance and regulatory information

FCC Compliance Statement:
This equipment has been tested and found to comply with the limits for a Class A 
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference when the equipment is 
operated in a commercial environment. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with 
the quick setup guide and user manual, may cause harmful interference to radio 
communications. Operation of this equipment in a residential area is likely to cause 
harmful interference in which case the user will be required to correct the interference 
at their own expense.

Warning

This is a Class A product. In a domestic environment this product may cause radio 
interference in which case the user may be required to take adequate measures.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions :
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that may 

cause undesired operation

Содержание HILS65204


















Отзывы:

Похожие инструкции для HILS65204