EN-26
Metering
This sets the metering method for calculating the exposure.
Capture Md.
This sets the recording method at the time of capturing images
.
Quick Shot
If this function is set to “On”, the camera takes a quick shot without focusing.
* On / Off
Digi. Zoom
This sets whether or not to use digital zoom at the time of photography.
* On / Off
Preview
This sets whether or not to display the captured image on the screen immediately after
the image is captured.
* On / Off
Date Print
The date of recording can be printed directly on the still images. This function must be
activated before the image is captured.
* On / Off
Setup
Refer to the section in this manual titled “Setup Menu” for further details.
* Center:
Averages the light metered from the entire frame, but gives greater weight to
the subject matter at the center.
* Spot:
A very small portion of the center of the screen is measured to calculate the
correct exposure.
* Average:
The exposure is measured all of the image area.
* Single:
Captures one image at a time.
* Continuous:
Permits continuous capture of up to 3 images.
* AEB:
Permits 3 consecutive images in the order of standard exposure,
underexposure and overexposure compensation.
* Album Shot:
Creates an album-like layout to combine 3 shots into a single image.
* Burst:
Permits continuous photography while pressing and holding the
shutter button. As long as you hold the shutter button pressed,
images are captured until the memory capacity is exhausted.
* Cont.flash:
Permits continuous capture of up to 3 images with flash.
* Pre-shot:
Lets you capture the background first, then have someone to capture
you in front of it.
* Coupl.shot:
Uses separate areas to combine two shots. You can include yourself
in the shot.
* Burst 30fps
Permits continuous capture of up to 30 images in the resolution 640
x480 within 1 second.
