Hitachi H 45SR, Инструкция по эксплуатации

Страница: 16 / 28

English
16
6. Even when the switch is on, the motor is running and the tool head is pressed
to the demolition surface, the demolition hammer sometimes does not start
operating. In these instances, turn the switch o ff , press the tool head against the
demolition surface again, and turn the switch on and o ff . This should start the
demolition hammer operating. Repeat this procedure for several minutes, and the
demolition hammer will heat, after which it will operate when switched to ON-LOCK.
SYMBOL
WARNING
The following show symbols used for the machine. Be sure that you understand their
meaning before use.
Read all safety warnings and all instructions.
SPECIFICATIONS
Voltage 220V
Power Input 950 W
Full-load Impact Rate 3000 /min
Weight (without cord, side handle) 5.9 kg
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the accessories listed in the below.
Case 1
Bull Point 1
Side Handle 1
Front cap 1
Dust cover 1
000Book_H45SR_ChS.indb 16 000Book_H45SR_ChS.indb 16 2015/6/16 9:25:50 2015/6/16 9:25:50