GD 2000 DVD ROM Manual
Page
• Power Source
•This DVD-ROM drive should be operated from the type of power
source indicated on the marked label. (+12V DC /~ +5V DC)
• To avoid the risk of electric short circuits or damage to your DVD-ROM
• Do not expose your DVD-ROM drive to rain or moisture.
• Do not open or remove the cover of your DVD-ROM drive.
• Turn off your SYSTEM and unplug the power supply cable of your
SYSTEM from the wall outlet before installing your DVD-ROM drive,
interface card or connecting cables.
• Do not allow liquids of foreign objects to get in.
• Do not place heavy loads on the DVD-ROM drive.
• Do not USE this DVD-ROM drive without mounting it.
• Firmly attach the DC power supply cable, connecting cables between
the DVD-ROM drive and other devices, and keep them connected
securely.
• In case of failure
In case of the following conditions, turn off the SYSTEM including the
DVD-ROM drive and unplug the power supply cable of the SYSTEM from the
wall outlet immediately. Do not attempt to service the DVD-ROM drive yourself,
and refer servicing to qualified service personnel immediately.
• If objects of any kind have been entered into your DVD-ROM drive
• If liquid has been spilled into your DVD-ROM drive
• If your DVD-ROM drive has been exposed to rain or water
• If your DVD-ROM drive does not operate normally when the
operating instructions are followed
• If your DVD-ROM drive has been dropped or your DVD-ROM drive
has been damaged
• If your DVD-ROM drive exhibits a distinct change in performance
Precautions For Safety
GD-2000 Manual 6/18/98 5:22 PM Page 5
