-8-
Put the parts together in the reverse order of disassembly, with the precautions given below.
(1) Apply machine oil to Felt Packing (B)
[23]
then mount it to the Packing Gland
[26]
to increase the dust
resistance.
(2) Generously lubricate the teeth of the Gear and Pinion Set
[33]
with grease. Rub grease onto the teeth
with your fingers so that the grease reaches each tooth bottom. Note that under-lubricated Gear and
Pinion Set
[33]
may wear at a faster rate.
(3) When replacing the Armature
[10]
and the Ball Bearing 6000VVCMPS2L
[15]
on the commutator side,
press inward on the Dust Seal
[14]
while taking care of its direction until the end face of the Dust Seal
[14]
hits against the butting surface of the Armature
[10]
and make sure that the Dust Seal
[14]
cannot
turn freely. (See Fig. 3.)
The Dust Seal
[14]
is an important element for improved dust protection of the Ball Bearing
6000VVCMPS2L
[15]
. Be sure to use a new one at every disassembly work of the Ball Bearing
6000VVCMPS2L
[15]
.
(4) Apply Three Bond TB 1406 Screw Locking Agent to the following screws.
• Two Seal Lock Screws (W/Sp. Washer) M5 x 14 (Black)
[1]
which fix the Bearing Cover
[9]
in place.
• Four Hex. Socket Hd. Bolts (W/Flange) M5 x 16
[27]
which fix the Packing Gland
[26]
in place.
Reassembly
Armature
[10]
Ball Bearing 6000VVCMPS2L
[15]
Fig. 3
Dust Seal
[14]
