background image

6

2.  If liquid leaks onto your skin or clothes, wash well with 

clean water such as tap water immediately.

 

There is a possibility that this can cause skin irritation.

3. If you 

fi

 nd rust, foul odor, overheating, discolor, 

deformation, and/or other irregularities when using the 

battery for the 

fi

 rst time, do not use and return it to your 

supplier or vendor.

WARNING

If a conductive foreign matter enters in the terminal of lithium 

ion battery, the battery may be shorted, causing 

fi

 re. When 

storing the lithium ion battery, obey surely the rules of 

following contents.

  Do not place conductive debris, nail and wires such as 

iron wire and copper wire in the storage case.

  To prevent shorting from occurring, load the battery in 

the tool or insert securely the battery cover for storing 

until the ventilator is not seen.

REGARDING LITHIUM-ION BATTERY 

TRANSPORTATION

When transporting a lithium-ion battery, please observe the 

following precautions.

WARNING

Notify the transporting company that a package contains a 

lithium-ion battery, inform the company of its power output 

and follow the instructions of the transportation company 

when arranging transport.

  Lithium-ion batteries that exceed a power output of 

100Wh are considered to be in the freight classi

fi

 cation 

of Dangerous Goods and will require special application 

procedures.

 For transportation abroad, you must comply with 

international law and the rules and regulations of the 

destination country.

Wh

Power Output

2 to 3 digit number

USB DEVICE CONNECTION 

PRECAUTIONS (ONLY WITH 

UC18YSL3 CHARGER)

When an unexpected problem occurs, the data in a USB 

device connected to this product may be corrupted or lost. 

Always make sure to back up any data contained in the USB 

device prior to use with this product.

Please be aware that our company accepts absolutely no 

responsibility for any data stored in a USB device that is 

corrupted or lost, nor for any damage that may occur to a 

connected device.

WARNING

  Prior to use, check the connecting USB cable for any 

defect or damage.

  Using a defective or damaged USB cable can cause 

smoke emission or ignition.

  When the product is not being used, cover the USB port 

with the rubber cover.

  Buildup of dust etc. in the USB port can cause smoke 

emission or ignition.

NOTE

 There may be an occasional pause during USB 

recharging.

  When a USB device is not being charged, remove the 

USB device from the charger.

  Failure to do so may not only reduce the battery life 

of a USB device, but may also result in unexpected 

accidents. 

  It may not be possible to charge some USB devices, 

depending on the type of device.

SYMBOLS

WARNING

 

The following show symbols used for the machine. 

Be sure that you understand their meaning before 

use.

G14DSL / G18DSL / G18DSL(S): 

Cordless Disc Grinder

Read all safety warnings and all instructions.

Always wear eye protection. 

V

Rated voltage

n

Rated speed

/min

Revolution or reciprocations per minute 

Wheel outer diameter 

Wheel hole diameter

t

Wheel thickness 

Peripheral speed 

kg

Weight

Switching ON

Switching OFF

Disconnect the battery

Battery capacity
The battery remaining power is nearly empty. 

Recharge the battery soonest possible
The battery remaining power is a half.
The battery remaining power is enough.

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package contains the 

accessories listed on page 10.

Standard accessories are subject to change without notice.

0000Book̲G14DSL.indb   6

0000Book̲G14DSL.indb   6

2015/09/25   18:53:46

2015/09/25   18:53:46

Содержание G 18DSL

















Отзывы: