E-6
Operating the Touch Operation Panel
MENU
Touch this button first when the
display or operation panel is off.
When tapped again, it turns off the
display or operation panel.
Lock
(Long-press MENU for about 3 seconds)
Use this to prevent incorrect
operation.
(P.E-25)
PM2.5 Sensor (P.E-24)
Use this to select PM 2.5 sensing.
Airflow (P.E-21)
Use this to switch the
airflow rate.
Option (P.E-22)
Use to switch to quick cycle.
Note
The air purifying feature works in all operation modes.
The touch operation panel is made of glass.
If the touch operation panel display disappears, touch to display it again.
The touch operation panel display will disappear when is touched again.
The upper part of the touch operation panel is the display section and the lower part is the control section.
Use the touch operation panel to switch settings.
Display Switch
Mode (P.E-20)
Switches the operation mode.
Timer (P.E-24)
Air Sensor (P.E-26)
Temperature/
Humidity Monitor
Filter Cleaning
Filter
Cleaning
4hr
On
Off
2hr
Water Refill
Timer
Skin Moist
Humidify
Air Purify
Max
Auto
Air
flow
Option
PM2.5
Sensor
Odor
Pollen
Absence
Rapid
Display
Mode
·
Lock
·
·
Dimmer
Type 1/2/Off
Maintenance
Reset
Water Refill
Notification Display
Display
Operation
Panel
Displays the room temperature and humidity while operating.
This should be taken as a guide only.
(P.E-26)
Displays notification contents that came out while operating.
Example: ,
(P.E-39)
Lights up when it is time to clean the humidifying filter.
(P.E-28)
The indicator lights up when the water in the water tank is nearly empty.
(P.E-31)
The indicator lights up when the child lock is set.
(P.E-25)
The indicator lights up when the unit is operating on timer.
(P.E-24)
The indicator lights up when the unit is operating with PM2.5 sensing.
(P.E-24)
The indicator lights up when the unit is operating on humidify mode or skin moisturize mode.
(P.E-20)
The level of air contamination detected
by the odor and dust sensors is
indicated through different colors.
Switches the display between temperature /
humidity monitor.
(P.E-24)
Switches the display of the touch
operation panel. (Long-press for about 3
seconds)
(P.E-19)
The glass touch may have a different reaction depending on the sur-
rounding temperature and humidity, physical condition of the user, and
the condition of the electronic appliances near by the unit.
If it does not respond after touching, release and try again.
If the interval between touches is short, the unit may respond incorrectly.
The sensitivity will not change by the force applied when touching.
There may be no response if the operation panel is wet or dirty.
Wipe off with a dry cloth to use.
The display may be difficult to view if the unit is placed in brightly lit
places such as near a window with direct sun light.
Use this to set the timer
mode (off-timer).
Use this to reset the display
when the “Filter Cleaning”
indicator lights up.
(P.E-31)
(Long-press the off-timer for
about 3 seconds)
Filter
Clean
ing
4hr
On
Off
2hr
Wate
r Refil
l
Timer
Skin M
oist
Hum
idify
Air Pu
rify
Max
Auto
Air
flow
Option
PM
2.5
Senso
r
Odor
Pollen Abse
nce
Rapi
d
Displa
y
Mode
·
Lock
·
·
Dimme
r
Type
1/2/O
ff
Main
tenan
ce
Reset
Содержание EP-A9000
Страница 43: ...E 43 Troubleshooting Guide Replacement Parts Specifi cations ...
Страница 44: ...E 44 ...