- VII -
SAFETY INSTRUCTIONS (Continued)
INSTRUCTIONS for AC Adapter
WARNING
Failure to follow the following instructions may result in fire or electric shock.
Do not use any other AC adapter for the Gateway than the one attached to
the Gateway.
Do not use the AC adapter attached to the Gateway for any other device.
Do not use any other power cord for the Gateway than the one attached to
the Gateway.
Do not use the power cord attached to the Gateway for any other device.
Do not cover the AC adapter with any objects. Covering the AC adapter may
cause the AC adapter to overheat and may result in fire or an electric shock.
Damage to the power cord may result in fire or electric shock. Do not use the
power cord if there are visible signs of damage. Use of a damaged power cord
may result in fire or electric shock.
Do not let the power cord pressed under a heavy object such as desk or
furniture.
Do not fasten the power cord with nails or staples.
Do not connect the cord to the AC adapter supplied with the Gateway to an
extension cord. The connection to an extension cord may result in a fire.
Do not apply multiple loads to the outlet that is feeding power to the Gateway.
Overloading the outlet may result in the overheating or deterioration of the power
strip and cause a fire.
Always connect the Gateway to a main power supply that meets the specified
rating of 100-120 V ac, 60 Hz.
When the Gateway shares the same outlet box with multiple outlets, ensure
that the total amps of the connected devices, including the Gateway, does not
exceed the limits specified by the outlet.
Insert the power cord plug fully into the outlet. Arc tracking on dust collected
in the gap or contact of a metallic object on energized plug blades through the
gap may cause fire or an electric shock.
When unplugging, hold and pull the plug case instead of the cord.
Otherwise, fire or an electric shock due to cable damage may result.
