Hitachi EDS-3170A, Руководство по обслуживанию

Страница: 5 / 64

ED-S3170A/ED-X3270A
4
ED-S3170A/ED-X3270A
5
4-2 Ghost adjustment
Signals for internal adjustment
���
���
������� �����
Adjustment procedure
1. Use DAC-P - GHOST - R: in the Adjustment menu
to adjust so that R color ghost is at a minimum.
(Set the adjustment value to default, and then
raise the value. When a ghost appears to the left
of a vertical line, reduce the value by 2 steps.)
2. In the same way, use DAC-P - GHOST-G: in the
Adjustment menu to adjust so that G color
ghost is at a minimum.
3. In the same way, use DAC-P - GHOST-B: in the
Adjustment menu to adjust so that B color ghost
is at a minimum.
4. Adjustment
4-1 Before adjusting
4-1-1 Selection of adjustment
When any parts in the table 4-1 are changed,
choose the proffer adjusting items with the chart. Table 4-1: Relation between the replaced part and adjustment
���������
����
�����
����������
�������
����������
���������
����������
������
�������
����������
�����
����������
����������
��������
�����������
��������
������
��������
����
��������
�����
����
����
��������
����������
: means need for adjustment. : means not need for adjustment.
: means recommended.
4-1-2 Setting of condition before adjustment
1. Before starting adjustment, warm up the projector
for about 10 minutes.(Blank white)
2. Set Zoom Wide to Max. And project an image
with more than 40 inches in diagonal size.
3. Normalizing the video adjustment.
(Press the [MENU] button of the Remote control
transmitter to display the MAIN menu, and then
press the [RESET] button. And select the
[DEFAULT]. Next, open MAIN menu and press
the [ ] key to display the PICTURE1 menu, then
press the [RESET] key to set to [DEFAULT].)
*note :The MAIN and PICTURE1 menu is not
reset with no signal.
4. Set the normal at OPT-WHISPER in the menu.
5. Reset KEYSTONE correction.
6. Perform all adjustments from the Adjustment
menu.
Perform the following operations to display the
Adjustment menu.
a. Press the [MENU] button of the Remote control
transmitter (the Setup menu will appear).
b. Next, press the [RESET] button one time. And
press the [RESET] button again for 5 seconds
or more (the Adjustment menu will appear).