English
142
Disc error.
• Use another disc.
• See *3 on page 145.
24, 26
• Mismatch in recording information may be caused by editing
done on some device other than this DVD video camera/
recorder.
Initialise the disc or use another disc.
• Initialising the disc will erase all data on it.
125
Disc full. Cannot
execute.
Delete unnecessary scenes before using this disc, or use another
disc.
103
Disc has no data.
This message will appear when an attempt is made to execute
playback or editing on Disc Navigation with no scene recorded.
—
Disc has no Play List.
Switching of play list was selected with no play list stored.
118
Disc includes protected
scenes. Delete scenes?
The disc may be software protected from a device other than this
DVD video camera/recorder. To release this case, use a device
that has executed software-protect.
—
Disc is full. Cannot add
control info.
The number of entered scenes has reached the limit that can be
entered, so the control information for generating thumbnails
cannot be added.
Combine several scenes or delete them.
103, 106
Disc is not formatted.
Format the disc now?
• Has the disc been initialised on a PC?
Choose “YES” and initialise the disc when using it on this DVD
video camera/recorder. Initialisation will delete all data on the
disc.
• See *2 on page 145.
125
Drive overheat. Please
retry later.
The temperature inside the DVD video camera/recorder is too
high, and reading or writing of the data on disc may not be
performed normally.
Turn the DVD video camera/recorder off and wait for a while. The
temperature will be effectively decreased if the DVD video
camera/recorder is placed in a well-ventilated spot.
41
DVD-R* Disc, 16:9
mode cannot be
changed when Video
mode is STD.
With DVD-RW (VF-mode)/DVD-R disc, the setting of 16:9 mode
will not be possible when the Video mode is STD.
* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode).
88
DVD-R* Disc, Video
mode and 16:9 mode
cannot be changed.
With DVD-RW (VF-mode)/DVD-R disc, the movie quality mode
and 16:9 mode once used for recording cannot be changed.
* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode).
28, 88
END OF DISC
The disc is full.
You cannot record on this disc anymore. Prepare another disc or
delete unnecessary movie scenes from this disc.
103
End scene cannot be
divided.
Division is not possible at the end of scene.
105
Error occurred. Please
replace disc or format
disc.
• Abnormality has occurred with the DVD-RAM disc to be
repaired. Initialise the disc before using it, or use the another
disc. Initialising the disc will erase all data on it.
• See *2 on page 145.
125
Message
Cause & Troubleshooting
Reference
page
