Hitachi DV-PF7E, Инструкция по эксплуатации

Страница: 18 / 36

PICTURE SEARCH
If you want to skip or repeat a scene during playback, press
g
or
h
.
• Press it again and the VCR will now search at super high
speed. (This function will not work for a NTSC tape.)
• Press
B
( PLAY ) to return to normal playback.
QUICK-FIND
This function enables you to search and confirm the contents
of the recorded programme(s) using the index mark.
• Use the remote control for this procedure.
• The tape must be fully rewound.
Press QUICK-FIND to skip to the beginning of next pro-
gramme.
Press
B
( PLAY ) to view at normal speed.
The Quick-Find is cancelled.
NOTES:
• This function will not operate in the Recording mode.
• When you want to cancel the Quick-Find while in
progress, press
C
.
• When the end of a tape is reached during the Quick-
Find, the tape will automatically rewind to the beginning.
After rewinding finishes, the DVD/VCR will eject the tape.
INDEX SEARCH
• The index mark will be made automatically when
I
is
pressed. It will also be marked at the starting point of
Timer recording and OTR.
• The index mark is not recorded if
F F
is pressed and
released during recording.
• The time gap between index marks on the tape should
be greater than 1 minute for SP recording and 2 min-
utes for LP recording.
• Use the remote control for this procedure.
Press SEARCH MODE so that the Index Search menu
appears.
Enter the number of recordings you
wish to skip by pressing
K
or
L
within
30 seconds.
Press
s
or
B
to start index search.
The DVD/VCR begins rewinding or fast forwarding to the
beginning of desired programme. When the preset pro-
gramme is reached,the DVD/VCR will start playback
automatically.
• If you want to go in the forward direction, press
B
. If
you want to go in the reverse direction, press
s
.
• If you want to stop search function, press
C
.
• After index search, the DVD/VCR will play the tape auto-
matically.
NOTES:
• Index Search can be set up to 20.
• This function will not operate in the Recording mode.
• Operations must be followed up within 30 seconds,
from step to . Otherwise the Index Search mode
will be cancelled.
• To exit the Index Search mode, press MENU step .
TIME SEARCH
This feature allows you to go to a specific point on a tape by
entering the exact amount of time you wish to skip in order to
reach the point.
• Use the remote control for this procedure.
Press SEARCH MODE twice so that
the Time Search menu appears.
Enter your desired time to skip by
pressing
K
or
L
within 30 seconds.
2
1
2
3 2
3
2
1
2
1
VCR
Press
K
or
L
to select “PIC-
TURE”, then press
B
.
Press
B
until the desired mode
(NORMAL, SOFT, or SHARP) is
indicated on the TV screen.
• If the On screen menu still remains, press MENU to
exit the menu.
• Once you select the Picture Select mode, it stays in
effect even after you turn off the DVD/VCR.
4
3
– 18 – EN
PLAYBACK FUNCTION
Normal Playback
Insert a prerecorded tape. The DVD/VCR will
turn on.
• If the safety tab has been removed, the
VCR will start playback automatically.
• If a cassette is in the DVD/VCR, STOP symbol appears
in TV screen when turning on the DVD/VCR(VCR
mode).
Turn on the TV and select the video channel on the TV.
Begin playback by pressing
B
( PLAY ).
• Tracking adjustment will be done automatically (Digital
Tracking function) when you start playback. To adjust
the tracking manually, press
PROG (
K
or
L
) on the
remote control or PROGRAM (
K
or
L
) on the
DVD/VCR.
• When a tape has reached the end, the VCR will rewind
the tape to the beginning and eject the tape automatically.
To stop playback, press
C
.
• If no corresponding symbols appear on the display when
you press buttons such as
B
,
I I
,
g
or
h
, that means
no cassette tape is in the DVD/VCR. Please insert a tape.
Counter Reset
• You can reset the counter by pressing
CLEAR/C.RESET on the remote control.
STILL/SLOW
You can freeze the picture on TV screen by pressing
F F
dur-
ing playback.
• You can advance the picture one frame at a time by
pressing
F F
during the Still mode.
• When the picture begins to vibrate vertically, stabilize the
picture by pressing PROG (
K
or
L
) in the STILL mode.
• You can watch in the slow motion by pressing SLOW
during playback or the still mode. (The DVD/VCR mutes
the sound during slow motion. You can control the
speed by pressing
g
or
h
.)
• If a noise bar appears on the TV screen, you can
reduce it by pressing PROG (
K
or
L
).
• After the DVD/VCR has been in Still/Slow mode for 5
minutes, it will stop automatically to protect the tape
and the video head from damage.
• To return to playback, press
B
( PLAY ).
4
3
2
1
VCR
Auto Repeat Playback
This feature allows you to play a tape over and over.
Press MENU .
Press
K
or
L
to select “SETUP”, then press
B
.
Press
K
or
L
to select “AUTO REPEAT”, then press
B
.
Begin auto repeat playback by pressing
B
so that “ON”
appears next to “AUTO REPEAT”.
• When in Stop mode, Auto Repeat mode will start auto-
matically.
• If the On screen menu still remains, press MENU to
exit the menu.
• To cancel the Auto repeat mode, press
B
at step
“OFF” will appear next to “AUTO REPEAT” on the TV
screen.
• Once you select the Auto Repeat mode, it stays in
effect even after you turn off the DVD/VCR.
4
4
3
2
1
VCR
Picture Select
This function enables you to select the picture quality of a tape.
• Use the remote control for this procedure.
Press MENU .
Press
K
or
L
to select “SETUP”,
then press
B
.
2
1
VCR
Search Functions
MENU
TIMER
SET UP
INITIAL
SET UP
AUTO REPEAT
[ON]
PICTURE [NORMAL]
AUTO RETURN [ON]
INDEX 03
TIME 2 : 50
H9751BD(EN).qx3 04.5.31 5:30 PM Page 18