Hitachi DV-PF5E, Инструкция по эксплуатации

Страница: 23 / 33

– 23 –
EN
PLAYING A DISC
During playback, press
C C
.
• Resume message will appear on the TV screen.
Press
B
( PLAY ), playback will resume from the point at
which playback was stopped.
• To cancel resume, press
C C
twice.
NOTES:
• The resume playback takes a little longer to take place
compared to the normal playback.
• The resume information stays on even when the power
is turned off.
2
1
CD DVD
Resume
The Zoom function allows you to enlarge the video image and to
pan through the enlarged image.
Press ZOOM during playback.
• Playback will continue.
Press ZOOM repeatedly to select the required zoom factor:
x2, x4 or OFF.
Use
CURSOR buttons (
L
/
K
/
B
/
s
) to move the zoomed pic-
ture across the screen.
To exit zoom mode, press
ZOOM .
NOTES:
• Zooming function does not work while disc menu is shown.
• x4 zoom is not available on some discs.
4
3
2
1
DVD
During playback, press
g
or
h
repeatedly to select
the required forward or reverse speed.
• For DVDs, fast forward or reverse search speed is dif-
ferent depending on the disc. Approximate speed is
1(x2), 2(x8), 3(x50), 4(x100).
• For Audio CDs, the approximate speed is x16.
To return to normal playback, press
B
( PLAY ).
2
1
CD DVD
Fast Forward / Reverse Search
During playback, press
F F
.
Press
g g
or
h h
.
• Slow motion playback will begin and sound will be muted.
Press
g g
or
h h
repeatedly to select the required speed.
• Slow forward or reverse speed is different depending on
the disc. Approximate speed is 1(1/16), 2(1/8), 3(1/2).
To return to normal playback, press
B
( PLAY ).
NOTE:
• On DVDs, set “STILL MODE” to “FIELD” on the Display
menu, if pictures in the slow playback mode are blurred.
(Refer to page 26.)
4
3
2
1
DVD
Slow Forward / Slow Reverse
Zoom
There are three ways to begin playback of an Audio CD at a
specific Track.
Using the Number buttons
Press the number buttons to enter the desired Track
number.
• Playback will start at the selected track.
• For single digit tracks (1-9), press a single number
(eg. track 3, press 3 ).
• To play track 26, press +10, 2, 6 on the number but-
tons .
Using the SEARCH MODE
Press SEARCH MODE .
• The Track search display appears.
Within 30 seconds, select a desired track number using
the
number buttons . For single digits press 0 first if the
total track of the disc is more than 10 tracks.
• Playback will start at the selected track.
Using the SKIP
H H G G
During playback, press SKIP
G G
to move to the next track.
Press it repeatedly to skip subsequent tracks. Press SKIP
H H
to go back to the beginning of the current track. Press it
repeatedly to go to the previous tracks.
• Track number will appear briefly on the front display panel.
• If any
SKIP is pressed while the playback is paused,
the playback will be paused again after skipping to the
next track.
NOTE:
• SKIP
H G
are not available when playback is
stopped.
2
1
1
CD
Press SEARCH MODE once for the Chapter search,
twice for the Title search during
playback.
Enter the desired chapter/title num-
ber using the
number buttons.
2
1
DVD
Title / Chapter Search
Press SEARCH MODE repeatedly until the Time Search
appears during playback.
Within 30 seconds, enter a desired disc time using the
number buttons .
• Playback will start at the specified time.
• Press
CLEAR to erase the incorrect input.
NOTE:
• For Time Search, “0” appears automatically when there
is no need to enter a number. For example, “0:0_:_ _”
appears in the Time Search display if the total time of
the disc is less than 10 minutes.
2
1
CD DVD
Time Search
/2
Track Search
CHAPTER TITLE OFF
( current chapter repeat) ( current title repeat) (repeat off )
To activate the repeat function, press REPEAT during play-
back.
• The repeat mode changes as described below every
time you press the button.
DVD
Repeat
REPEAT TITLE / CHAPTER
• REPEAT is available only during playback.
Press AUDIO repeatedly during playback to select
between “STEREO”, “L-CH” or “R-CH”.
STEREO - both right and left channels are active
L-CH - only left channel is active
R-CH - only right channel is active
NOTES:
• If the Virtual Surround setting is “1” or “2”, the sound
mode will be fixed to STEREO, and can not be changed.
1
CD
Stereo Sound Mode
H97H1BD(EN).qx4 04.10.27 5:11 PM Page 23