– 10 –
EN
REMOTE CONTROL OF THE TV
Controlling the TV
Once programmed, the DVD’s remote control is ready
to control the TV.
NOTES:
• Be aware that not all of your TV’s functions may work
even though the remote control is correctly
programmed.
To operate the TV
• You can turn on your TV by pressing the TV POWER button.
• You can change the channels with the TV CH
(
p
p
/
o
o
) and the volumes with VOL (
/
) .
To operate the DVD/VCR
Press the VIDEO/TV to operate your DVD with the remote.
NOTES:
VIDEO/TV button is not corresponded to TV which can switch
to TV input mode directly.
Programming the remote control for the TV
Turn off the TV.
Program the remote control.
Aim the DVD’s remote control at your TV set. Hold down
the TV POWER button while you press the number corre-
sponding to your brand of television as shown in the
chart.
For example;
If you have a Hitachi television, press the TV
POWER and 1 at the same time. If this button combination
sends a signal that matches with your TV, the TV will turn on,
and you’ll know the remote is set to control the television.
NOTES:
• If that button combination does not change the TV
channel, go through the whole list of button combina-
tions one by one until you find one that does change
your TV channel.
• Also, if your brand of TV is not listed in the chart, try all
• If the TV channel still doesn’t change after going
through all the button combinations listed, it is likely
that you will not be able to program this remote control
for your TV.
2
1
TV Brands
Press the TV and This Number
HITACHI
1
SONY
2
RCA
3
SANYO
4
ZENITH
5
PANASONIC1
6
PANASONIC2
7
SHARP1
8
SHARP2
9
TOSHIBA
0
JVC
CLEAR
MITUBISHI
+10
MAGNAVOX
SUBTITLE
FUNAI
AUDIO
GOLDSTAR
DISPLAY
E5710UD.QX3 03.2.7 19:09 Page 10