Hitachi DV-P588A, Руководство по обслуживанию

Страница: 16 / 48

3-1
MAINTENANCE AND INSPECTION 3
FLOW CHART NO.1
The power cannot be turned on.
FLOW CHART NO.2
The fuse blows out.
After servicing, replace the fuse.
Is the fuse normal?
Is normal state restored when once unplugged
power cord is plugged again after several seconds?
Is the EV+3.3V line voltage normal?
Check each rectifying circuit of the secondary circuit
and service it if defective.
Check the presence that the primary component
is leaking or shorted and service it if defective.
See FLOW CHART No.2 <The fuse blows out.>
Check if there is any leak or short-circuiting on the
primary circuit component, and service it if
defective. (Q1001, Q1003, T1001, D1001, D1002,
D1004, D1005, D1011, C1003, C1005)
Check the presence that the rectifying diode or
circuit is shorted in each rectifying circuit of
secondary side, and service it if defective.
Yes
Yes
Yes
No
No
No
FLOW CHART NO.3
When the output voltage fluctuates.
Yes
No
FLOW CHART NO.4
When buzz sound can be heard in the vicinity of power circuit.
Check if there is any short-circuit on the rectifying diode and the circuit in each rectifying circuit of the secondary side,and
service it if defective. (D1003, D1006, D1008, D1016, D1030, IC1002, Q1002, Q1004, Q1011, Q1050: DV-P588A(AU) only)
Does the photo coupler circuit on the secondary
side operate normally?
Check IC1001, D1012, D1024 and their periphery,
and service it if defective.
Check IC1001, IC1006, D1015, D1048 and their
periphery, and service it if defective.
FLOW CHART NO.5
-FL is not outputted.
Is -24V voltage supplied to the anode of D1003?
Check D1003 and periphery circuit, and service it
if defective.
Check if there is any leak or short-circuit
on the loaded circuit, and service it if defective.
Yes
No
3-1 TROUBLESHOOTING
Troubleshooting is how to service for the specifying malfunction or poor parts.
Detect malfunction or poor parts and service as the following charts.