A
BOUT
THE
S
YSTEM
S
YSTEM
R
EAR
V
IEW
1-9
System Rear I/O
Figure 1-4.
System Rear I/O
Power Sub-System
Figure 1-5.
PSU to Mainboard Module Description
A single power supply unit (default) is supplied in the system. A secondary PSU is available
for redundancy functionality.
Table 5: System Rear I/O Definition
N
O
.
ICON
NAME
D
ESCRIPTION
1.
Dedicated NIC
Dedicated RJ45 connector
2.
VGA connector
Maximum display resolution: 1920x1200 32bpp@60Hz
(reduced blanking)
3.
USB 3.0 port
USB 1 port; connect to USB device
4.
USB 0 port; connect to USB device
5.
Identification LED
Blue blinking - Identifier; Off - Normal
6.
Micro USB port
Transmit in serial signal for debug or terminal concentrator
7.
PFR Status LED
(Only
for certain
models)
Off: Power Off/PFR Module is not installed
Green On: Authenticated
Amber On: Failed
Amber Blinking: Authentication /Recovery is executing in T-1
8.
MicroSD slot
Backup BMC SEL.
