−
5
−
Fig. 9
(iii) Install the Washer (B) [25] in the Rear Case [17] with the projection of the Washer (B) [25]
engaged with the recess in the Rear Case [17], and turn the Washer (B) [25] clockwise until it
can turn no further. (See Fig. 10.)
Fig.10
(c) Install the Shift Arm [18] into the assembly reassembled in step (b).
(i) With the ridge at the Shift Arm [18] set on the Motor [27] side, first install them on the unmarked
side of the assembly reassembled in step (b). Then insert the projection on the Shift Arm [18]
into the hole in the Rear Case [17] and make sure that the projection is fitted into the recess in
the Slide Ring Gear [19] mounted within the Rear Case [17]. (See Fig. 11.)
Recess
Projection
[25]
Projection
Groove
[25]
[24]
[23]
[22]
[21]
[20]
[19]
[4]
[18]
[17]
[16]
[15]
[14]
[13]
[12]
[11]
