manualshive.com logo in svg

Hitachi DS 14DFL, Технические данные и руководство по обслуживанию, Страница: 25 / 35

Поделиться
Скачать
Hitachi DS 14DFL Скачать руководство пользователя страница 25

--- 22 ---

(6) Other precautions in reassembling

After completion of reassembly, check that the rotating direction of the Drill Chuck 

[2] <2>

 matches the

position of the Pushing Button 

[33] <34>

.   When the Pushing Button 

[33] <34>

 is pressed from the (R) side,

the rotating direction of the Drill Chuck 

[2] <2>

 should be clockwise as viewed from behind.  Switch on and off

the Model DS 18DFL/DS 14DFL using the battery.  Check that the runout of the Drill Chuck 

[2] <2>

 is

0.8 mm or less at the position 110 mm (Model DS 18DFL) (Model DS 14DFL: 85 mm) away from the tip of the

chuck using a 12-mm dia. test bar (Model DS 18DFL) (Model DS 14DFL: 9-mm dia. test bar).

(7) Screw tightening torque

Special Screw (Left Hand) M6 x 23 

[1] <1>

: 3.9 --- 4.9 N

•

m (40 --- 50 kgf

•

cm)

Drill Chuck 

[2] <2>

: 17.6 --- 21.6 N

•

m (180 --- 220 kgf

•

cm)

Screw Set D3 x 12

 [15] <15>

: 0.6 --- 1.0 N

•

m (6 --- 10 kgf

•

cm)

Machine Screw (W/Sp. Washer) M4 x 6 

[28] <29>            

:

 

1.1 --- 1.9 N

•

m (11 --- 19 kgf

•

cm)

Tapping Screw (W/Flange) D3 x 16 (Black) 

[26] <27>      

: 1.1 --- 1.9 N

•

m (11 --- 19 kgf

•

cm)

Special Screw (A) M5 

[42] <43>

                          

: 1.5 --- 2.5 N

•

m (15 --- 25 kgf

•

cm)

9-2. Precautions in Disassembly and Reassembly of Battery Charger

Please refer to the Technical Data and Service Manual for precautions in disassembly and reassembly of the

Battery Charger UC 18YGL.

(e) Check for proper operation of the Clutch Dial 

[4] <4>

 and the Shift Knob 

[35] <36>

.

When the reassembly procedure up to step (d) is completed, ensure that the every indication on the Clutch

Dial 

[4]

 

<4>

 from the number "1" to the drill mark "         " can be aligned with the triangle mark on Housing

(A). (B) Set 

[29] <30>

 respectively and that the Clutch Dial 

[4] <4>

 turns moderately.  If any indication on

the Clutch Dial 

[4] <4>

 cannot be aligned with the triangle mark on Housing (A). (B) Set 

[29] <30>

,

correctly remount the Clutch Dial 

[4] <4>

 according to step (2) as it is improperly mounted.  Check for

proper operation of the Shift Knob 

[35] <36>

.  Check that the speed changes between high and low

properly by shifting the Shift Knob 

[35] <36>

.  If the speed cannot change properly or moderately, correctly

remount the Shift Knob 

[35] <36>

 according to step (3) as it is improperly mounted.

(5) Mounting the Hook Ass'y 

[37] <38>

Check that the V-Lock Nut M5 

[38] <39>

 is mounted to the Hook Ass'y 

[37] <38>

.  Mount the Hook Spring 

[41]

<42>

 and secure it with Special Screw (A) M5 

[42] <43>

. Be sure to mount the Hook Spring 

[41] <42>

 with its

larger diameter side pointing inward the housing.

Содержание DS 14DFL




































Отзывы:

Нет отзывов