Hitachi DS 12DM Скачать руководство пользователя страница 22

Страница: 22 / 30

--- 19 ---

Fig. 12

Fig. 13

Protrusion

[32]

Protrusion

[8]

[9]

[5]

[4]

[5]

[4]

[30]

[28]

[8]

[4]

[38]

Notch

Groove

Protrusion Protrusion

Protrusion

Concave
portion

Protrusion

Mount the Clutch Dial [4].

The Nut [4] has three protrusions. One of these protrusions is wider than the others. The Clutch Dial [4]

has three concave portions. One of these concave portions is wider than the others. Mount the Nut [5] to

the Clutch Dial [4] aligning the wider protrusion of the Nut [5] with the wider concave portion of the Clutch

Dial [4] (the wider concave portion of the Clutch Dial [4] is at the position where indicated with "1" viewing

from the outside). Check that the protrusion of the Click Spring [9] is inserted into the groove inside the

Clutch Dial [4].

Wider protrusion

Protrusion

Protrusion Concave

portion

Concave portion

Indicated with "1"

Groove

Wider concave
portion

(7) Reassembly of the main unit

(a) Mount the power supply unit and the drive unit that were reassembled in the above procedure to Housing

(A) [38]. At this time, align the protrusions of the Brush Block [32], Front Case [8] and Motor Spacer [28] with

the concave portions of Housing (A) [38], the notch of the Magnet [30] with the protrusion of Housing (A) [38],

and the groove of the Clutch Dial [4] with the protrusion of Housing (A) [38] (see Fig. 13).

Содержание DS 12DM































Результаты поиска

Содержание DS 12DM

Отзывы:

Бренды по названию

Популярные бренды

Hitachi DS 12DM, Технические данные и руководство по обслуживанию

Результаты поиска

Содержание DS 12DM

Отзывы:

Бренды по названию

Популярные бренды