Hitachi DH 24PC3, Технические данные и руководство по обслуживанию

Страница: 30 / 47

--- 27 ---
Fig. 16
Change Lever [21] Pushing Button [18]
(2) Disassembly of the Change Lever
As shown in Fig. 16, pressing the Pushing Button [18] hard, turn the Change Lever [21] 45 û counterclockwise
from the "hammering only" position ( mark). Pry out the Change Lever [21] at this position.
(3) Disassembly of the tool retainer
Slide the Grip [3] fully in the arrow direction as shown in Fig. 17 and remove the Front Cap [1] . Pulling the
Grip [3] as shown in Fig. 18, remove the Stopper Ring [2] with a retaining ring puller. Then the Grip [3] , Ball
Holder [4] , Steel Ball D7.0 [23] , Holder Plate [5] , Holder Spring [6] and Washer (B) [7] can be removed from
the Cylinder [24] .
Front Cap [1]
Stopper Ring [2]
Ball Holder [4]
Holder Plate [5]
Holder Spring [6]
Washer (B) [7]
Grip [3]
Fig. 18
Steel Ball D7.0 [23]
Grip [3]
Fig. 17