Hitachi DH 20PB, Технические данные и руководство по обслуживанию

Страница: 14 / 33

--- 11 ---
Key rail
(2 pieces)
Piston pin
Cylinder
Steel ball
Clutch
Armature shaft
Circular groove
Piston
Reciprocating bearing
Second shaft
First gear
Armature
Fig. 2
Piston reciprocating mechanism
In conventional hammer drills, a piston is caused to reciprocate by a connecting rod and crank shaft, and the
crank shaft and the cylinder axis are at a right angle to each other. Accordingly, the armature shaft and the
cylinder axis are at a right angle to each other. In the Model DH 20PB through adoption of a spiral drive
system (a mechanism using a reciprocating bearing), a more compact design has been achieved by arranging
the armature shaft in parallel with the cylinder axis. Referring to Fig. 2, the rotation of armature is transmitted
to the second shaft via the first gear. The second shaft rotation is further transmitted through a spline to the
clutch, which engages with a reciprocating bearing and causes it to rotate. However, as illustrated, circular
grooves on the inner race of the reciprocating bearing are positioned on an angle of inclination with relation to
the second shaft. The rotation of the inner race and the shaft causes that angle of inclination to change
regularly forward and back with relation to the second shaft, and produces a rocking motion to the outer race
of the reciprocating bearing. Finally, a rod extending from the outer race of the reciprocating bearing is
connected to the piston by a piston pin, and causes the reciprocating motion of the piston.
Tool shaft