manualshive.com logo in svg

Hitachi Deskstar 7K160, Технические характеристики

Хитачи Дескстар 7К160 - это надежный и производительный винчестер с объемом 160 ГБ. Чтобы получить подробные технические характеристики этого устройства, скачайте бесплатный руководство пользователя с описанием на manualshive.com. Легко скачать сведения о спецификациях и настройках винчестера для ознакомления.

Поделиться
Скачать
background image

Deskstar 7K160 Hard Disk Drive Specification

101 

•

Read Stream DMA

•

Write Stream DMA

•

Read Log Ext

Support of the Streaming feature set is indicated in Identify Device work 84 bit 4.

Note that PIO versions of these commands limit the transfer rate (16.6 MB/s), provide no CRC protection, and limit 
status reporting as compared to a DMA implementation.

10.17.1  Streaming commands

The streaming commands are defined to be time critical data transfers rather than the standard data integrity critical 
commands. Each command shall be completed within the time specified in the Configure Stream command or in the 
streaming command itself in order to ensure the stream requirements of the AV type application. The device may 
execute background tasks as long as the Read Stream and Write Stream command execution time limits are still met.

Using the Configure Stream command, the host may define the various stream properties including the default 
Command Completion Time Limit (CCTL) to assist the device in setting up its caching for best performance. If the 
host does not use a Configure Stream command, the device shall use the CCTL specified in each streaming 
command, and the time limit is effective for one time only. If the CCTL is not set by Configure Stream command, 
the operation of a streaming command with a zero CCTL is device vendor specific. If Stream ID is not set by a 
Configure Stream command, the device shall operate according to the Stream ID set by the streaming command. 
The operation is device vendor specific. 

The streaming commands may access any user LBA on a device.  These commands may be interspersed with non-
streaming commands, but there may be an impact on performance due to the unknown time required to complete 
the non-streaming commands.

The streaming commands should be issued using a specified minimum number of sectors transferred per command, 
as specified in word 95 of the Identify Device response.  The transfer length of a request should be a multiple of the 
minimum number of sectors per transfer.

The host provided numeric stream identifier, Stream ID, may be used by the device to configure its resources to 
support the streaming requirements of the AV content.  One Stream ID may be configured for each read and write 
operation with different command completion time limits be each Configure Stream command.

10.17.2  Urgent bit

The Urgent bit in the Read Stream and Write Stream commands specifies that the command should be completed in 
the minimum possible time by the device and shall be completed within the specified Command Completion Time 
Limit.

10.17.3  Flush to Disk bit

The Flush to Disk bit in the Write Stream command specifies that all data for the specified stream shall be flushed 
to the media before posting command completion.  If a host requests flushes at times other than the end of each 
Allocation Unit, streaming performance may be degraded.  The Set Features command to enable/disable caching 
shall not affect caching for streaming commands.

10.17.4  Not Sequential bit

The Not Sequential bit specifies that the next read stream command with the same Stream ID may not be sequential 
in LBA space.  This information helps the device with pre-fetching decisions.

Содержание Deskstar 7K160











































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Deskstar 7K160

IBM TotalStorage DS4800 Installation, User And Maintenance Manual preview
TotalStorage DS4800
Бренд: IBM Страницы: 250
IBM TotalStorage DS4800 User, Installation And Maintenance Manual preview
TotalStorage DS4800
Бренд: IBM Страницы: 234
IBM T400 Setup, Operation, And Service Manual preview
T400
Бренд: IBM Страницы: 136
IBM System Storage DS5020 Overview preview
System Storage DS5020
Бренд: IBM Страницы: 31
IBM Netfinity EXP300 Hardware Maintenance Manual preview
Netfinity EXP300
Бренд: IBM Страницы: 93
IBM DS4700 EXPRESS Installation, User'S, And Maintenance Manual preview
DS4700 EXPRESS
Бренд: IBM Страницы: 270
IBM Ultrastar 36LZX Quick Installation Manual preview
Ultrastar 36LZX
Бренд: IBM Страницы: 2
IBM DCAS-32160 - Ultrastar 2.1 GB Hard Drive Specifications preview
DCAS-32160 - Ultrastar 2.1 GB Hard Drive
Бренд: IBM Страницы: 232
IBM System Storage TS3310 Maintenance Information preview
System Storage TS3310
Бренд: IBM Страницы: 531
Kanguru Defender Basic Quick Start Manual preview
Defender Basic
Бренд: Kanguru Страницы: 17
LaCie LITTLE BIG DISK THUNDERBOLT 2 Getting Connected preview
LITTLE BIG DISK THUNDERBOLT 2
Бренд: LaCie Страницы: 6
Data General 6045 Series Manual preview
6045 Series
Бренд: Data General Страницы: 58
Backyard Discovery GABLE Assembly Manual preview
GABLE
Бренд: Backyard Discovery Страницы: 72
Gigastone SmartBox Quick Start Manual preview
SmartBox
Бренд: Gigastone Страницы: 2
SanDisk DMS platform Brochure preview
DMS platform
Бренд: SanDisk Страницы: 4
TrekStor t-series Manual preview
t-series
Бренд: TrekStor Страницы: 100
garofalo BAULE 150 User Manual preview
BAULE 150
Бренд: garofalo Страницы: 12
Husky H48JSB Use And Care Manual preview
H48JSB
Бренд: Husky Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды