-16-
A
B
Rib
Rib
A
B
• Mount the drive unit and put the internal wires
Rib
• Mount the LED
(2) Mount the LED to Housing (A).(B) Set
[33]
. Put the internal wires of the LED between the ribs of
Housing (A).(B) Set
[33]
.
(3) Mount the drive unit to Housing (A).(B) Set
[33]
. Put the internal wires of the LED and Switch (W/Lock)
[41]
through the rib of the housing.
(4) Close Housing (A).(B) Set
[33]
and mount the Handle Cover
[39]
. Tighten the four Pan Hd. Tapping
Screw D3 x 8
[34]
.
(5) Mount the two Click Plate
[37]
to Housing (A).(B) Set
[33]
and apply grease (Hitachi Motor Grease No. 29).
